Description

Original control panel card for Miele induction hob Miele 8336883

The original Miele power and control board, part number 8336883, is the main PCB that controls the heating power of the induction zones and the control logic of the hob. The part is designed for Miele induction hobs and is supplied as a genuine OEM part with an exact fit to the manufacturer's specifications.

The hob does not respond to touch? A cooking zone does not heat up? These are the classic signs of a failure in the power and control board. Such a board is responsible for both regulating the power to the induction coils and reading user commands. When it fails, the hob is partially or completely silent.

A moment before ordering – safety above all! To ensure a successful repair and maintain the longevity of the device, it is mandatory to use only original parts. Non-original parts may cause serious electrical damage. Now click the 'Check Model Compatibility' button at the top of the page and our system will immediately confirm that the part is suitable for you.

Why is the power and control panel the heart of the stove?

The power and control board on an induction cooktop PCB is responsible for two critical functions together. It regulates the power to the heating zones in real time, and translates user commands from the touch panel into actual operation. A failure in it can manifest itself in several ways: a specific cooking zone that stops working, the cooktop turning off on its own, an error code on the display, or the touch panel responding inconsistently.

Location of the model sticker: On Miele hobs, the E-Nr sticker is usually located on the hob frame – find it by lifting the hob off the worktop, or on the side that is exposed when you open the hob cabinet. Look for the number that starts with KM.

You can find all original Miele spare parts at Plrom.

Original vs. Unapproved Replacement – ​​What's the Difference?

📋 Technical specifications

✅ Compatible models

Specific models have not been verified by an official source. To ensure exact compatibility, check with the E-Nr number on your hob sticker – click the 'Check Model Compatibility' button at the top of the page, or contact our team.

🔧 Is it possible to replace the control panel on an induction hob yourself?

Replacing the power and control board on an induction hob requires professional technical knowledge – this is not a DIY operation. The component operates at high voltages, and is directly connected to the induction coils and the main electrical circuit. Improper handling can cause serious electrical damage – both to the appliance and the touch interface.

⚠️ Important: Replacing the power and control panel requires complete disconnection from the electricity supply, knowledge of electrical diagrams, and appropriate tools. It is highly recommended to call a certified technician from the official service. Unprofessional installation may cause additional damage, void the warranty, and jeopardize the safety of the home.

Prefer to have an expert handle it? Our service team is available to coordinate a professional installation – contact us.

If there is a tutorial video for this model, we recommend watching it in the video tab below.

💡 Tip from Daniel – our stove expert

From Daniel’s field experience: When a new power and control panel arrives, the first step before installation is to check the coils themselves. If an induction coil is damaged due to a failed board, replacing the board alone will not solve the problem. Checking the electrical continuity of the coils before installation often saves a double service visit – a tip that experienced technicians know, but customers often don’t.

❓ Frequently Asked Questions

What causes the power and control board to fail on an induction hob?

Common causes are: voltage surges in the electrical network, liquids spilling into the hob, and normal wear and tear over the years. Miele KM series hobs may show panel failure even after prolonged overheating. Early detection via an error code on the display allows for repair before damage to other components occurs.

Is it possible to diagnose a fault in a control panel at home before ordering the part?

There are a few things to check: Is there an error code on the display? Is the problem specific to one cooking zone? Is the hob only partially responsive? A 100% accurate diagnosis requires an electrical measuring device. It is recommended to document the symptoms and share them with the technician before ordering the part.

Is an original Miele control panel different from a replacement panel?

Yes – the difference is significant. A genuine Miele board is calibrated according to the manufacturer’s protocol, matches the original error codes, and meets the exacting CE standards. Non-genuine boards can cause unpredictable behavior, coil mismatch, and in extreme cases – damage to other parts.

🚚 Shipping Information | ↩️ Transaction Cancellation and Returns