Description

Original complete freezer drawer for Liebherr refrigerator-freezer 9791165

The Liebherr 9791165 complete freezer drawer is an original spare part containing a front and a drawer body. It is intended for Liebherr refrigerators and freezers from the CBN, CN, CP, CUN, SBS, IK, IKB, SIGN series and more. The original part ensures a perfect fit to the sliding rails, maintaining the level of insulation in the freezer compartment, and proper storage of frozen food.

Is the drawer broken, cracked, or not closing properly? This is the most common problem with Liebherr freezers after several years of use – and in most cases it can be solved by replacing the drawer yourself, without calling a technician. Just before ordering – it is imperative to verify an exact fit. Click the 'Check Model Compatibility' button at the top of the page to confirm that SKU 9791165 is exactly the right fit for your appliance.

Why does the drawer stop working and when should it be replaced?

A freezer drawer tends to break down after prolonged use for several reasons: cracked plastic, a broken hinge, or a front that separates from the body. Any of these problems prevents a tight seal and compromises the ability to retain cold. SKU 9791165 replaces the drawer as a complete unit – front and body together – so no additional work is required.

✅ Original Liebherr part – manufactured to the same specifications as the original drawer that left the factory ✅ Freezer-resistant plastic – withstands deep cold of minus 18°C ​​and below ✅ Precise connection to the rails – fits exactly into the device's sliding rails, without manual "adjustments" ⚠️ Unapproved replacement parts may warp in the cold and not seal properly, which will cause increased electricity consumption and accelerated wear of the compressor

From the experience of our technicians – about 60% of customers who contacted us about a “freezer that doesn’t cool enough” discovered that the problem was a drawer that didn’t close completely. Replacing the drawer alone solved the problem completely, without any intervention in the cooling systems.

Where can you find the model number (E-Nr)? On most Liebherr models, the sticker is located on the left interior wall of the refrigerator, or at the bottom of the storage compartment near the vegetables. Look for a number that starts with CB, CN, CP, CUN, IK, SBS, SIGN or GN – followed by four digits.

📋 Technical specifications

✅ Compatible models

The part is compatible with the following models. Check exact compatibility against the E-Nr on the sticker:

NoFrost combined refrigerators and freezers: CBN3913, CBN3956, CBN4033, CBNES3956, CBNES3957, CN3913, CN4003, CN4013, CN4056, CNES4013, CNES4056, CNESF4003, CP4023, CP4056, CPES4056

Side-by-Side Refrigerators: ECBN5066, ECBN6156, ECN6156, SBSES7155, SBSES7252, SBSES7253, SBSES7353

Integrated refrigerators and freezers: IK3510, IKB3510, IKB3514, SIGN3524, SIGN3576

Upright Refrigerators and Freezers: CTN3123, CTN3153, CTNES3153, CUN3123, CUN3923, CUN4023, GN2323, GN2723, GN3023, GNP2313, GNP2713, GNP3013, SKBES4211

🔧 How do you replace the freezer drawer in a Liebherr?

The replacement is simple and takes about 5 minutes – without tools and without dismantling panels. All you need to do is remove the old drawer and insert the new one into the same rails. The procedure does not require disconnecting the power supply.

1. Remove the contents of the drawer. – Completely empty before replacement
2. Pull the drawer out. – Pull all the way along the rails, then tilt slightly upwards to release from the edges
3. Insert the new drawer. – Align the tabs with the sliding strips and push in gently.
4. Check the closure. – Insert and remove 2-3 times to ensure smooth movement and tight closure.
5. Refill – Put the contents of the drawer back in and check that the drawer closes completely.

⚠️ Please note: If the rails themselves are damaged, they must also be replaced before inserting the new drawer.

💡 Tip from the experts

The most common mistake we see: Customers order just the drawer front when the body itself is cracked, only to find out later that the front won’t hold. SKU 9791165 eliminates this problem – it comes as a complete unit. A rule to remember: If the plastic has yellowed, cracked in a corner, or shows signs of breakage – replace the entire drawer, not just a part. In our experience, a new part inserted into a worn body breaks again within a few months.

❓ Frequently Asked Questions

Is the freezer drawer also suitable for Liebherr Side-by-Side models?

Yes – SKU 9791165 is also compatible with SBSES and ECBN series Side-by-Side models. Make sure your E-Nr is listed in the list of compatible models. Drawers in SBS models are usually located in the narrow freezer half, and the replacement method is the same as for other models.

The drawer fell off the rails and is not broken – does it still need to be replaced?

Not necessarily. If the drawer is intact and not cracked, first check the rails themselves. Sometimes the tabs on the rail break and allow the drawer to slide out. In this case, the rail must be replaced separately. If the drawer itself was damaged in a fall – a total replacement with 9791165 is the right solution.

What is the difference between an original drawer 9791165 and a replacement part?

The original drawer is made of plastic that has been tested by Liebherr to withstand extreme temperatures. An unapproved part may shrink or warp in the cold, not seal properly, and cause moisture to accumulate on the inner wall. Choosing an original part is a guarantee of standard sealing and support for the cooling performance of the appliance.