Description
Liebherr refrigerator freezer control panel 6115956
The control board, SKU 6115956, is the electronic part that serves as the “brain” of a Liebherr refrigerator-freezer. It is responsible for operating the compressor, regulating the temperature in both compartments, and managing the defrost cycles. A genuine Liebherr part for direct replacement when the existing board fails.
When the refrigerator stops cooling, displays a recurring error, or the compressor does not start – the control board is most often the cause. Check compatibility by model number before ordering.
What does the control panel do on a Liebherr refrigerator?
The control panel controls everything that happens in the refrigerator: when the compressor comes into operation, what the temperature is in each compartment, when defrosting is performed, and what warnings to display on the display. When the panel fails, the refrigerator doesn’t know what to do – and the result is a cessation of cooling. Sometimes the failure is sudden and complete, and sometimes it starts inconsistently – a temperature that changes for no reason, a compressor that kicks in and out at an unusual frequency, or complete silence from the motor area.
📋 Technical specifications
| attribute | value |
|---|---|
| Manufacturer's SKU | 6115956 |
| Component type | Control panel |
| Device brand | Liebherr |
| Device type | Refrigerator and freezer |
| originality | Original part |
✅ Compatible models
Compatibility testing is required based on the appliance's model number. The model number is located on a sticker on the inside wall of the refrigerator compartment. Call us before ordering to verify compatibility.
🔧 When do you replace the control panel on a Liebherr refrigerator?
Difficulty level: High – requires a qualified technician. Estimated replacement time: 30-60 minutes.
Signs that indicate a need for replacement:
- The compressor does not run even though the correct voltage is present.
- The temperature does not stabilize or does not respond to adjustment
- A fault code repeats on the display that does not disappear after resetting
- The refrigerator is operating normally but one of the compartments is not cooling.
- A fault that appeared after a power outage or lightning strike
Before replacing, the technician will check that the failure is indeed in the board and not in the sensor or wiring - to prevent unnecessary replacement.
💡 Tip from the experts
Our technicians often encounter the following case: a control panel that appears to have completely failed – but the real cause is a stuck temperature sensor that is sending an incorrect reading to the panel. That is why it is always worth checking the sensors first before ordering the panel. When it comes to a real panel failure – a genuine Liebherr part is the safest solution over time.
❓ Frequently Asked Questions
Can I replace a control panel myself?
Not recommended. The control panel is connected to power components and the compressor, and incorrect installation may cause additional damage or a risk of electric shock. Replacement requires a qualified technician with the appropriate tools.
How long does a new control panel last?
A genuine Liebherr board is designed for a long life under the normal conditions of use of the appliance. Repeated voltage drops are the most common cause of premature damage - it is recommended to connect the refrigerator through a surge protector.
How do you know that the failure is in the board and not the compressor?
If the compressor receives power but does not start at all – the failure is likely in the control board. If the compressor tries to operate, makes noise but fails – the compressor itself may be at fault. Only a test with a multimeter will confirm the source.










