Description

Original burner head base for Miele gas stove Miele 8530120

The burner head base 8530120 is the internal part on which the detachable burner head of a Miele gas hob sits. The part is connected directly to the gas supply and ensures the creation of an even and safe flame. This is a genuine Miele OEM part, part number 8530120, intended to be replaced by a qualified technician only.

Miele gas hobs that have an uneven, weak flame or no flame at all – the problem is usually not in the visible burner head. The more common cause is the base of the internal burner – the part that is directly connected to the gas pipe and controls its flow.

When the base is worn or damaged, the burner head does not receive the required gas pressure. The result: a blue flame that turns yellow, unstable ignition, or the flame extinguishing itself.

Because the part is connected directly to the gas infrastructure, its replacement requires only a qualified technician.

You can browse Miele original spare parts in our range of categories.

A moment before ordering – safety above all! Non-original parts in a gas infrastructure can cause a real safety hazard. Now click the 'Check Model Compatibility' button at the top of the page for instant confirmation that the part is suitable for your device.

What causes burner head base failure?

The base of the burner head is exposed to high heat and grease residue over the years. Common reasons for failure:

• Blocking gas vents: Food debris penetrates the gas flow openings and interferes with proper elimination.
• Gasket wear: The internal gasket between the base and the gas pipe loses its shape and begins to leak.
• Physical damage: Dropping a heavy pot on the stove can deform the base body.
• Corrosion: In a humid environment, the base metal may begin to corrode from the inside.

In each of these situations, only replacing the base with the original one solves the problem in the long term.

Original vs. Unapproved Replacement – ​​What's the Difference?

📋 Technical specifications

✅ Compatible models

How to check compatibility? The models that match this part number have not yet been published on the website. To make sure the part fits your hob, locate the model sticker (E-Nr) affixed to the appliance. On Miele gas hobs, the sticker is usually located in the door frame of the storage compartment under the hob, or on the back of the appliance.

After finding the model number, you can contact the PLROM Service team for quick compatibility confirmation.

🔧 How do you replace the burner head base?

Replacement is only possible for a qualified technician. The base of the burner head is connected directly to the stove's gas pipe - disconnecting and working on an active gas line without proper training poses a real safety hazard.

The technician will perform the following steps:

1. Gas disconnection: Close the main gas valve before any work.
2. Breakdown of the work area: Removing the iron grill, burner dome, and burner head.
3. Disconnecting the old base: Loosen the screws and the connection from the gas pipe.
4. Installing the new base: Assembly part number 8530120 with resealing.
5. Integrity check: Controlled gas opening, tightness test, and verification of proper flame.

⚠️ Important: After any work on a gas line - a leak test is mandatory before use.

Prefer an expert to install? Plrom's service team is available to coordinate a professional installation – contact us.

💡 Tip from the experts

From the experience of Daniel, Plrom's official service specialist: Before ordering a new burner base, first check that the openings in the detachable burner head are not clogged. In about 30% of the cases we receive, the uneven flame is caused by a blockage in the burner head – and not by a problem with the base itself. Thoroughly cleaning the head with a thin layer of grease, while the device is completely cold, sometimes solves the problem without the need to replace any parts at all.

❓ Frequently Asked Questions

How do I know that the problem is in the base of the burner and not another part?

If a thorough cleaning of the burner head has not improved the flame, and if the gas is reaching the other burners on the stove properly – there is a high chance that the problem is in the base. A qualified technician will accurately diagnose the fault before ordering the part.

Can I use a stove with a damaged burner base?

Not recommended. A damaged base may cause a small gas leak that is not always noticeable. Prolonged use poses a safety risk. It is recommended to stop using the damaged burner and contact a technician as soon as possible.

How long does the replacement take?

An experienced technician can replace a burner head base on a Miele gas stove in 30-60 minutes, including a leak test. The time depends on the accessibility of the burner and the tightness of the screws.

🚚 Shipping Information | ↩️ Transaction Cancellation and Returns