Description

Original control card for Miele dishwasher electrical/control unit Miele 9925641

The original Miele control card 9925641 (ELPW517-F) is the electronic brain of the dishwasher. It receives data from all the sensors in the appliance and sends commands to all the drainage, heating and rinsing components. When this card fails, the dishwasher stops working completely. A genuine Miele part ensures full compatibility, reliable operation and a long service life.

The dishwasher is not responding and pressing the power button does nothing? From the experience of our technicians, this type of fault indicates a failure in the control board in 80% of cases. Now click the “Check Model Compatibility” button at the top of the page to make sure the part is suitable for your dishwasher before ordering.

⚠️ Safety above all: A control card is a complex spare part that affects an entire electrical assembly. Use only an original part. A non-original part may cause additional damage and void any existing warranty.

Why does a Miele dishwasher stop working completely?

The control board is the central component that connects the control panel to all the appliance systems. A failure in it causes one of these symptoms: the control panel does not respond to pressing, the indicator lights are off even though the dishwasher is plugged in, a program stops in the middle and does not finish, or error codes E2–E5 that are not resolved by turning the dishwasher off and on.

Why does this happen? The number 1 reason for control card failure in Israel is a sudden drop in electrical voltage. The digital card is very sensitive to voltage surges, and its electronic components can burn out in a short circuit. Moisture penetration into the electronic space = another risk that Miele planned in advance with unique shielding in the original part.

✅ Genuine Miele part 9925641 Designed precisely for your model = No need for “adjustments” like non-original parts ✅ Electronic components approved by Miele = Performance identical to manufacturer specifications ✅ Protects other components from chain failure

What are the signs that the card needs to be replaced?

A faulty control card manifests itself with symptoms that can look like a completely different problem. Early detection saves unnecessary technician visits and delays.

Clear signs of a command card failure:

• The control panel is black = does not respond to any pressing.
• Dishwasher lights are flashing in an unusual pattern and a program cannot be selected
• The dishwasher starts a program and stops after about 2 minutes, then restarts and stops.
• Error codes E2, E3, E4, E5 that appear repeatedly even after a complete shutdown
• The dishwasher drained water (=drain card complete) but does not start a new cycle

⚠️ Before replacing: Make sure the dishwasher is receiving proper voltage from the outlet, that the safety cutout hasn't tripped, and that the door closes completely. These are 2-minute checks that could save you the entire replacement.

📋 Technical specifications

✅ Compatible models

Important: Check for exact fit according to the E-Nr number on the model sticker. On Miele dishwashers, the sticker is on the upper lip of the door (visible when the door is open).

The part is compatible with Miele dishwashers from the following series:

• G4xxx (G4000 series)
• G6xxx (G6000 series)

Ensure an exact match according to the full E-Nr number on the model sticker - the series number alone is not enough.

🔧 How do you replace a control card in a Miele dishwasher?

Replacing a control card is a highly complex job. It involves dismantling the control panel, disconnecting several cable assemblies, and in some cases accessing the lower technical compartment. Average work time = 45–60 minutes for a qualified technician.

⚠️ Highly recommended: Replacing a Miele dishwasher control card requires professional technical knowledge. Incorrect installation may cause further electrical damage. Have a qualified technician perform the replacement.

Replacement steps (for general information):

1. Disconnect the dishwasher from the power supply completely – at least 5 minutes before starting work.
2. Disassemble the front control panel according to the manufacturer's instructions for your model.
3. Gently disconnect all cable connectors from the old card (take a picture before disconnecting)
4. Remove the old card and insert the new part 9925641
5. Connect the connectors according to the photo, close the panel and turn it on for testing.

💡 Tip from the experts

From the experience of our technicians, the number one reason for early failure of control cards in dishwashers in Israel is voltage surges. The home electrical grid in Israel is known for voltage fluctuations, especially in older neighborhoods. After replacing a control card = installing a high-quality lightning protector in the dishwasher outlet. A one-time operation of about 80 shekels that extends the life of the new card by years.

❓ Frequently Asked Questions

What is the difference between a control card and a dishwasher control panel?

The control panel is the physical panel with the buttons that you are standing in front of. The control card is the electronic board behind the control panel = the brain that processes your commands and sends them to all the components of the dishwasher. Sometimes only one of them will fail, so professional diagnosis is essential before replacement.

My dishwasher shorted out and now won't turn on = Is it the control board?

Not necessarily. A short circuit can damage both the control card and other components. Before ordering the card, ask a technician to diagnose and make sure that the problem is isolated to the card only. Replacing a card when the problem originates elsewhere will not solve the problem.

Can I buy a refurbished card instead of an original one?

It is possible, but not recommended. A refurbished card may work for a short period of time and then fail again, often without a cover. The original card 9925641 comes brand new from Miele, with the same performance as the original part that came out of the factory.

Where is the model sticker on a Miele dishwasher?

On most Miele dishwasher models, the model number (E-Nr) sticker is located on the top inside lip of the door – visible when the door is fully opened. The sticker contains the full model number and serial number – both of which are required to verify part compatibility.