Description

Original integrated dosing chamber for rinse aid and soap for Miele dishwasher Miele 10505507

The original Miele 10505507 combined dosing chamber is the part responsible for the precise release of rinse aid and detergent in every wash cycle. It is suitable for dishwashers from the G 1xxx to G 6xxx series and supports both rinse aid and tablets. An original part that ensures correct dosing, optimal drying and compliance with the warranty conditions.

The dosing chamber is the component that determines whether the dishes come out sparkling and dry – or with water spots and condensation. When the chamber stops releasing rinse aid properly, the first sign is white spots on glasses, water droplets remaining on the plastic, and poor drying even in the normal program. Incorrect dosage of soap impairs the quality of cleaning and accelerates internal wear of the dishwasher.

Just before ordering – it is important to use only genuine parts. A non-genuine part may not fit properly, leak, and cause damage that will void the warranty. Click the “Check Model Compatibility” button at the top of the page for instant confirmation that the part is compatible with your dishwasher.

Why does the dosing chamber stop functioning?

The integrated dispenser works in every wash cycle – opened, released, closed – thousands of times over the life of the appliance. The most common component to fail is the solenoid (electric opening mechanism) that wears out over time, or the internal rubbers that crack and allow rinse aid to slowly leak out with each cycle. The result: rinse aid runs out faster than usual – sometimes every few cycles – or the detergent tablets don’t release at the right time. In the experience of our technicians, more than 60% of cases where a Miele dishwasher produces water spots on glasses are resolved by replacing the dispenser alone.

What is the difference between a combined chamber and a rinse aid-only chamber?

The 10505507 combined compartment contains two compartments in one body: a rinse aid compartment with a separate reservoir and precise dosing mechanism, and a soap compartment with a spring-loaded door for release at the right time in the cycle. Older compartments (before the G 5xxx series) were separated - the soap compartment separately and the liquid compartment separately. The combined model is simpler to install, has more precise dosing, and allows the use of both standard rinse aid and Miele All-in-1 tablets. ⚠️ Important: If you use All-in-1 tablets, the rinse aid function in the dishwasher can be switched off - but the compartment itself must be in working order for the soap door to open.

📋 Technical specifications

✅ Compatible models

The part is suitable for the following models (make sure it matches the E-Nr number on the model sticker):

Series: G 1xxx, G 2xxx, G 3xxx, G 4xxx, G 5xxx (production until 2017), G 6xxx

Examples: G5050, G5055, G5210, G5260, G5310, G5350, G5590, G5640, G5690, G5740, G6xxx and more.

Where is the sticker? On Miele dishwashers, the model sticker (E-Nr) is located on the door edge – you can see it when you open the dishwasher door, on the inside of the frame.

🔧 How do you replace the dosing chamber in a Miele dishwasher?

Replacing the dosing chamber can be done by yourself, but requires patience and organized work. If you are not confident, you are welcome to seek the help of a certified Miele technician who will perform the work safely and professionally.

💡 Tip from the experts

Rinse aid that runs out quickly can indicate two completely different things: a dosage setting that is too high (can be adjusted in the dishwasher menu, usually 1–6) – or a defective chamber that is leaking. In the experience of our technicians, the most common mistake is to order a new chamber when the real problem is the dosage setting. Check first: Open the dishwasher by hand after a short cycle – if the rinse aid chamber is empty within 3–5 cycles, dosage 6 is probably set. Setting 3–4 is sufficient in most areas of Israel. Only if the liquid runs out even on setting 1–2, and there are permanent water stains – this is a defective chamber that needs to be replaced.

❓ Frequently Asked Questions

Why does my rinse aid run out every few cycles?

A properly functioning dispenser should hold rinse aid for dozens of cycles. If it runs out in 2–5 cycles, first check the dispenser setting in the dishwasher menu – setting 6 will empty the dispenser very quickly. If the dispenser also runs out quickly on setting 1, the inner rubber in the dispenser is probably damaged and needs replacing.

Can I use All-in-1 tablets without a separate rinse aid?

Yes – All-in-1 tablets like Miele’s UltraTabs have built-in rinse aid. On supported dishwashers, the liquid compartment can be turned off in the menu and left empty. But even in this mode, the soap compartment door must operate properly to release the tablet – a damaged compartment will prevent proper cleaning even with tablets.

Can I replace the dosing chamber myself?

You can do the replacement yourself if you have experience in disassembling electrical appliances. The operation requires dismantling the door panel and disconnecting electrical connections. For people without technical experience – it is recommended to contact an authorized Miele technician to prevent damage and maintain the warranty.