Description
Original filler door for inner lid of Miele top loading washing machine 7095422
Genuine Miele filler door, part number 7095422, is the complete inner part of the top loading lid (Lid II WTOP) for top-loader washing machines. The part includes a handle and a fixed seal and replaces older parts such as 5485081, 5485082, 6456311 and 7095421. Fits W200 and W600 series - essential for a tight and proper closing of the loading door.
Is the inner lid broken, not closing properly, or the seal worn out? This part solves just that. Don't put it off - a damaged lid can cause problems during washing and unusual noise. Check compatibility with your model before ordering.
Why won't my inner lid close - and what does this part fix?
The inner cover of the loading door is a consumable part. Over time, the handle wears out, the seal loses its elasticity, and the door does not close tightly. Result: the machine may start to vibrate, make noise, and in some cases leak. Replacing the entire inner cover – and not just the seal – ensures a perfect seal again.
In our service experience, most cases of unusual noise in a Miele top loader are directly related to a worn lid seal or a broken loading door . Replacing the entire part – rather than a partial repair – is the correct solution.
📋 Technical specifications
| attribute | value |
|---|---|
| Manufacturer's SKU | 7095422 |
| brand | Honey |
| Component name (English) | Flap – Lid II WTOP |
| Part type | Door / inner cover for filling opening |
| including | Handle + fixed gasket |
| Replaces part numbers | 5485081, 5485082, 6456311, 7095421 |
| Device type | Top-loader washing machine (top opening) |
| originality | Original Miele part |
✅ Compatible models
The part is suitable for the following series:
- W200 – All models in the series (E-Nr check recommended)
- W600 – All models in the series (E-Nr check recommended)
Important: The model number (E-Nr) sticker for your Miele top-loader washing machine is located on the inside of the lid. Open the lid, check the sticker, and enter the model number before ordering.
🔧 How do you replace the filler door?
The replacement is at a basic DIY level – does not require opening the machine. Work time: about 10 minutes. Tools: hands only.
Steps:
- Turn off the machine and unplug it.
- Open the main cover of the machine completely.
- Locate the interior door hinge – on the left and right sides.
- Remove the old door by gently pressing on the hinges while pulling upwards.
- Press the new door (7095422) into the hinges until it clicks.
- Check the closure – the door should close smoothly and tightly.
💡 Tip from the experts
The most common mistake we see: People try to replace just the rubber seal – then discover the handle is also cracked, and buy another part. Buy the entire door – this part comes with the handle and seal as one assembly, and the total replacement price is lower than two separate parts.
From our field experience: 70% of the times a customer reported an “unknown” noise in a top-loader – the problem was precisely with this inner door. As soon as we replaced it, the noise disappeared completely.
❓ Frequently Asked Questions
Is the loading door suitable for all Miele washing machines?
No. Part 7095422 is for W200 and W600 series top loaders only . Miele W1 and WW1 series front loaders use completely different parts. Before ordering, please make sure your appliance is a top loader and check the model number.
What is the difference between 7095422 and 7095421?
7095422 is the latest part that replaces 7095421. The two parts are functionally identical – 7095421 is an older version that was replaced by 7095422. If your model is compatible with 7095421, you can safely order 7095422.
Is it possible to replace just the gasket without replacing the entire door?
Technically – no. The filler neck seal on the W200/W600 models is a permanent part (fixed and cannot be removed independently) within the door structure. Miele supplies the part as one assembly. That is why the part is called “Lid II WTOP” and not “Seal Kit”.













