Description

Original door seal for Miele washing machine Miele 11086752

Just before ordering – safety above all!

A puddle of water next to the machine after every wash? The door seal (sleeve) is the first line of defense against washing machine leaks. When the rubber is torn, cracked or worn out – water starts to leak out during washing, and the damage can be significant: wet floors, damage to the flooring and even a short circuit. Using an original Miele gasket is the only way to ensure a perfect hermetic seal – non-original gaskets may not fit the dimensions of the Miele door precisely, wear out faster and cause repeated leaks. Now click on the 'Check Model Compatibility' button at the top of the page and our system will immediately confirm that the part is suitable for your machine.

Water leaking from the door? The original gasket restores the machine to full functionality

In our experience at the official Miele service laboratories , the door seal is one of the parts that wear out the fastest in a washing machine. The combination of water, pressure, heat and aggressive cleaning agents causes the rubber to wear out over time. When the seal tears or dries out, clear signs appear :

✅ A puddle of water under the door or next to the machine – Especially during filling or the main wash phase
✅ Moisture on the front panel – Water penetrates through small cracks in the seal
✅ Black mold in the rubber folds – A sign of constant moisture accumulation
✅ The door doesn't close properly. – Rubber that has shrunk or come loose

Why a genuine Miele gasket? Certified & licensed professional technicians recommend a genuine gasket for several critical reasons: Rubber specifically manufactured for Miele machines is resistant to high temperatures (up to 95 degrees) , resistant to biological washing powders and antifungal membranes, and a precise fit between the rubber and the machine drum – inaccurate dimensions will cause an immediate leak.

How do you know if the gasket needs replacing?

Visual inspection: Open the door fully and run your hand over the rubber. If you feel tears, cracks, or excessive roughness – it’s time to replace. Rubber that dries out loses its elasticity and cannot seal hermetically. Even if there is no visible tear, but there is a recurring leak during washing – the seal is no longer performing its function.

Does mold warrant replacement? Not always. Black mold in the folds of the rubber is common and results from moisture remaining after washing. It can be cleaned with a solution of white vinegar and water. However, if the mold does not come off despite thorough cleaning , or the rubber smells bad even after cleaning, it is recommended to replace the gasket to prevent contamination of clothes.

Expert Tip: How to Extend Gasket Life

✨ Leave the door open for ventilation. After each wash – moisture remaining in the folds accelerates mold and wear
✨ Wipe the rubber with a dry cloth. Once a week – soap and water residue accumulates and wears away the rubber.
✨ Use a reasonable amount of laundry detergent. – Excess foam puts pressure on the gasket and causes premature wear.
✨ Close zippers and remove sharp objects from pockets. – Coins, pins and screws tear the rubber during squeezing

Technical

Locating the model sticker on a Miele washing machine

Location of the model label on Miele machines: The label (data plate) is located on the inside of the door frame , just behind the rubber seal. Open the door fully, gently pull back the rubber flap and you will see the silver label with the model and serial number.

Additional location: On some models, the sticker is on the back of the machine or behind the top panel (the machine lid must be lifted).

Important tip: Take a picture of the sticker on your phone – this will save you time when ordering replacement parts in the future.

Frequently Asked Questions (FAQ)

Can I install the gasket myself or do I need a certified technician?

Replacing the door seal is a challenging job that requires partial disassembly of the front panel of the machine, removal of the inner and outer spring rings, and precise installation of the new seal. If you have technical experience and DIY skills , you can perform the replacement yourself using dedicated instructional videos for your model. However, incorrect installation will cause repeated leaks and may damage the door locking mechanism. Our technicians recommend calling a qualified technician if you do not have previous experience in washing machine repairs.

How long does it take to replace the door seal?

An experienced technician can replace the gasket in 45-60 minutes , including dismantling the front panel, removing the old gasket, cleaning soap residue from the frame, and installing the new gasket with the grommets. For a novice DIYer, the process can take up to two hours, especially if additional components are required to be disassembled.

Does the gasket come with the clamping rings (springs)?

Most original Miele seals do not include the clamping rings (inner and outer springs). In most cases, the existing rings can be reused if they are in good condition. If the rings are rusty or deformed, they must be purchased separately. Important: Incorrectly tightened rings will cause the seal to come loose during spinning.

What is the difference between an original gasket and a replacement gasket?

An original Miele seal is made of high-quality EPDM rubber that has been tested for resistance to aggressive detergents, high temperatures and a life cycle of over 10,000 washes. It comes in precise dimensions that ensure a perfect fit to the door frame and drum. Unapproved replacement seals may be made of cheaper rubber that dries out and crumbles within a year or two, and do not always fit precisely – leading to leaks and the need for repeated replacements. Using a non-original seal may void the warranty on the machine.

How do you prevent mold buildup on the new gasket?

To prevent mold after installing a new gasket , open the machine door immediately after each wash and allow for ventilation. Once a week – wipe the rubber folds with a dry cloth or absorbent sponge. Once a month – clean the rubber with a solution of white vinegar (1:1 with water) and wipe thoroughly. Avoid using bleach or econoline to clean the gasket – these substances accelerate the wear of the rubber.

Will replacing the gasket also solve problems with bad odors in the machine?

In most cases – yes . A moldy seal is one of the main causes of bad odors in the washing machine and on clothes. Replacing the seal eliminates the source of the mold , but it is also important to run a hot (90°C) cleaning cycle with a descaling agent immediately after installing the new seal to clean the rest of the machine.