Description

Original door seal rubber for Miele washing machine 10726130

The original Miele 10726130 rubber seal is the replacement part for the door seal in front-loading washing machines of the W1 and WCS series. The part prevents water leaks and ensures an exact fit for models WDB020, WED035 and WEE385. Replacing it restores a full seal and prevents damage to the floor and the washing cabinet.

Water on the laundry floor? This is a clear sign that the door seal has reached the end of its life. A torn or worn door seal is the number one cause of door leaks in Miele washing machines – and the good news: replacing it with an original part solves the problem completely. A non-original part may have different dimensions and cause repeated leaks.

A moment before ordering – safety above all! To ensure a successful repair and maintain the longevity of the device, it is mandatory to use only original parts. Non-original parts may cause damage to the device. Now click the 'Check Model Compatibility' button at the top of the page and our system will immediately confirm that the part is suitable for you.

What causes a leak from a Miele washing machine door?

The rubber seal sits between the machine door and the drum and creates a hermetic barrier during washing. Over time, wear, small tears, or deformation of the rubber breaks this seal. Common symptoms: water on the floor near the door, mold stains appearing on the edges of the rubber, a musty smell from the machine, and visible wrinkles in the rubber. Any of these signs indicate a rubber that needs to be replaced.

In our experience, about 80% of customers who complained about a “drip machine” solved the problem by replacing the door seal only. The original Miele part ensures that the new seal will fit exactly to the drum and door frame, without any “adjustments” in the field.

Location of the model sticker: The E-Nr sticker for Miele machines is located on the inside of the door, visible when the door is open.

Why choose original Miele rubber?

Original rubber is made from industrial grade EPDM rubber, resistant to temperatures up to 95°C. The part precisely matches the drum profile and front panel frame of the W1 and WCS series machines – dimensions measured according to manufacturer specifications only.

A non-genuine replacement part may have a different thickness, an inaccurate profile, and last less than one season. Our technicians have seen cases where non-genuine rubber caused damage to the front panel due to improper friction – damage that cost 5 times the initial savings.

✅ Exact fit according to Miele manufacturer specifications ✅ High temperature resistance up to 95°C ✅ High quality EPDM material for maximum longevity ✅ Ends water leaks from the door

📋 Technical specifications

✅ Compatible models

The part fits the following models (make sure it matches the E-Nr number on the sticker):

• WDB020 W1
• WDB020 WCS
• WED035 WCS P
• WEE385 WCS

🔧 How do you replace the door seal rubber on a Miele washing machine?

⚠️ Replacing the door seal rubber on a Miele machine requires professional technical knowledge. We recommend contacting a certified technician for safe and proper installation of the component. Below are the replacement steps for the technician's reference:

⚠️ Before any action – unplug the machine and turn off the water tap.

1. Open the front service panel of the machine.
2. Loosen the metal pin (clamp ring) that holds the rubber edge on the outside.
3. Gently release the rubber from the front panel.
4. Loosen the screw of the inner clamping ring (usually on the left side)
5. Remove the small drain tube attached to the rubber bottom.
6. Install the new rubber – make sure the direction marker (arrow or notch) is aligned downwards.
7. Connect the drain hose and tighten the clamping ring.
8. Return the rubber edge to the front panel and secure with the metal pin.

⚠️ Please note: Incorrect alignment of the rubber will cause leaks even after replacement. Make sure the marker is at the bottom.

⚠️ Our technicians' recommendation: Replacing the door seal on Miele machines requires partial disassembly of the front panel. It is recommended to contact a certified Miele service technician for optimal installation.

💡 Tip from the experts

From the experience of our technicians, 70% of customers who contacted us about a musty smell from the machine – discovered that the cause is water accumulating in the lower groove of the door rubber. The rubber is designed with a small pocket at the bottom designed to drain drops – but when it is dirty, it becomes a mold reservoir. Cleaning this groove once a month with a damp cloth extends the life of the rubber by at least two years and prevents bad odors. A 2-minute operation that saves unnecessary early replacement.

❓ Frequently Asked Questions

What are the signs that the door seals of a Miele machine need replacing?

The first sign is water on the floor near the door during or after washing. Other signs: a visible tear or crack in the rubber, deformation of the rubber that prevents it from closing properly, a persistent moldy smell that does not go away even after cleaning, and black spots on the edges of the rubber. Once a tear appears, wait less – the tear grows with each wash cycle.

Can I replace the Miele door seal rubber myself?

It is possible, but it is a relatively complex operation. The front panel must be disassembled and the new rubber must be aligned precisely - incorrect alignment will cause a repeat leak. Anyone with experience in repairing household appliances can do this in about an hour. Without experience - it is recommended to contact a qualified technician.

What is the difference between original Miele rubber and replacement rubber?

The original rubber is manufactured to exact Miele specifications – profile, thickness and rubber material match the appliance requirements. Replacement rubber (non-original) may have a different thickness, seal less well, and wear out faster due to low-quality rubber. A non-original part may also cause damage to the front panel due to improper friction.

How long is this part supposed to last?

Genuine Miele door seal rubber is designed to last approximately 10 years under normal use. The life of the rubber is shortened by using large amounts of detergent, frequent hot washes above 60°C, and not cleaning the rubber regularly. A simple monthly cleaning of the lower drain groove will significantly extend the life of the rubber.