Description

Original enamel baking pan for Sauter oven 9069534

The original Sauter baking pan 9069534 is an enamel pan designed for the 80-liter built-in & freestanding oven from the 25 80L_K05 series – built-in & freestanding ovens are built 90 cm wide. Manufactured according to the original manufacturer's specifications, with precise dimensions of 46.5 cm wide and 39 cm deep. Suitable for baking, roasting and cooking in the oven – and ensures uniform heat distribution and durability over the years.

When is it time to replace a pan? A pan that is deeply scratched, or has peeling coatings – no longer provides safe and even baking. Our experience shows that a damaged pan causes uneven cooking, which leads to undercooked food. Just before ordering – to ensure perfect performance, it is important to use only an original pan. Unapproved replacements may not fit in size and cause damage to the oven walls. Click the “Check Model Compatibility” button at the top of the page for a quick confirmation that the pan is compatible with your oven.

Why does an original template give better results?

A genuine Sauter pan is manufactured to the exact dimensions of the model's baking chamber. The precise fit allows for proper airflow, even heat distribution in all directions, and consistent baking results with every use. A non-genuine part may be too narrow, too wide, or not resistant to the high temperatures that the oven produces.

✅ Advantages of the original template:

• Accurate dimensions – 46.5×39 cm, specially designed for 90 cm (80 liter) Sauter ovens
• Heat resistance – Manufactured to withstand temperatures up to 250°C without deformation
• Uniform heat distribution – Uniform baking at every point in the pan
• Full compatibility – Fits effortlessly into the oven’s internal rails
• Simple cleaning – Smooth surface that is easy to clean after use

⚠️ Important for technicians: In a built-in & freestanding oven with active turbo, a non-original pan may block the airflow, causing uneven baking and increased energy consumption.

Where do you find the model sticker on a Sauter oven?

The model sticker (E-Nr — the full model number of the appliance) is usually located on the inner door frame – open the oven door and check the metal strip on the side. For built-in & Freestanding Oven models, the sticker is sometimes also located on the back of the appliance after it has been disconnected. Write down the full model number before ordering – this is the safest way to ensure a perfect fit.

From the experience of our technicians, 80% of customers who purchased a “universal” pan for Sauter ovens had to return it – because the edge dimensions did not match the original rails.

📋 Technical specifications

✅ Compatible models

The mold is suitable for Sauter 90 cm ovens from the 80 liter series (25 80L_K05) – please note that these are built-in & freestanding ovens built in 90 cm width, not standard 60 cm built-in & freestanding ovens. Check the full model number on the E-Nr sticker on your oven before ordering. The mold is also compatible with built-in & freestanding ovens from the Gram and Koenic brands on the same platform.

Not sure? Click the “Check Model Compatibility” button at the top of the page – the system will confirm in seconds.

🔧 How do you replace the pan in the oven?

Replacing a baking pan is a simple, tool-free process. Remove the old pan from the rails, insert the new pan at a slight angle, and push in until you hear a slight click. The entire process takes less than a minute.

Steps:

1. ⚠️ Make sure the oven is completely cold before replacing.
2. Remove the remaining grids and pans from the baking chamber.
3. Insert the new mold at a slight upward angle.
4. Slide in until the mold sits flat on the rails.
5. Check that the mold is not touching the sides – if there is friction, check that you have inserted it at the correct height.

💡 Tip from the experts

In our technicians’ experience, the most common reason for molds to quickly deteriorate is placing them in the oven when it’s hot – especially pouring cold water on a hot mold. A sudden temperature change causes metal deformation that cannot be repaired. Let the mold cool in the oven for at least 10 minutes before removing it. This simple action extends the life of the mold by at least 3-4 years.

❓ Frequently Asked Questions

Is the 9069534 pan suitable for my Sauter oven?

The mold is designed for Sauter 90 cm ovens with a capacity of 80 liters from the 25 80L_K05 series - not for standard 60 cm built-in & freestanding ovens. Check the model number on the E-Nr sticker inside the oven door - if your model appears on the compatibility list, the mold will fit and fit directly into the rails without modification.

Can this pan be used for grilling?

Yes. The pan withstands high temperatures and is suitable for all oven baking programs – including grill and turbo. It is recommended to place a grill rack over the pan when using the grill, so that the pan absorbs the roasting juices and prevents contamination of the bottom of the oven.

What is the difference between template 9069534 and template 9069622?

Both molds are designed for the same built in & Freestanding Oven series (25 80L_K05). The difference is in the color of the coating — 9069534 is dark gray and 9069622 is deep black. There is no functional difference. Choose according to the color of the original mold you have.