Description
Original humidity control frame for BioCool drawer Liebherr 7413438
The front frame 7413438 is located on the BioCool drawer and allows you to adjust the humidity level in the fruit and vegetable compartment. The part is original from Liebherr, and is suitable for a wide range of built-in and freestanding refrigerator and freezer models of the brand.
Are your vegetables drying out faster than they should, or are your fruits rotting prematurely? Sometimes the cause isn't the temperature, but the humidity level in the drawer. Daniel, our service specialist, points out that Liebherr's BioCool drawer was designed for just that: a slider on the front frame allows you to determine whether the air in the compartment will be dry or humid, depending on the type of food.
How does the BioCool drawer preserve fruits and vegetables?
The BioCool drawer allows you to adjust the humidity level in the compartment using a slider on the front frame, depending on the type of food being stored. When the original frame breaks, warps, or the slider no longer clicks into place, it is impossible to control the humidity level, and fruits and vegetables spoil faster.
According to Liebherr, maintaining the correct humidity level allows fruits and vegetables to be stored twice as long compared to a regular compartment. An original frame ensures that the slider stays in place, and that the pictograms (water drops) are clear and legible.
Model Locator Tip: The Service/E-Nr number for your appliance is usually found on the inside wall of the refrigerator or on the back of the appliance. It is a good idea to check it before ordering to confirm an exact fit.
You can find all original Liebherr spare parts in our variety of categories.
Original vs. Unapproved Replacement – What's the Difference?
| parameter | Original part (OEM) | Unapproved replacement |
|---|---|---|
| Model fit | Accurate, direct click | Not guaranteed, sometimes loose |
| Slider strength | Smooth and constant movement | Easily caught or dropped |
| Service life | Withstands prolonged daily use | Accelerated wear and premature breakage |
📋 Technical specifications
| attribute | value |
|---|---|
| Manufacturer's SKU | 7413438 |
| brand | Liebherr |
| Brand + MPN | Liebherr | 7413438 |
| Part name | Humidity control frame/front panel, BioCool drawer |
| material | Plastic (white) and aluminum/metal frame |
| התקנה | Simple DIY, no tools required |
✅ Compatible models
The part is suitable for the following models (make sure it matches the E-Nr number on the sticker):
EK: EK1620-20A/001, EK1620-20B/001, EK1620-20C/001, EK1620-21A/001, EK1624-20A/001, EK1624-20B/001, EK1624-21A/001, EK2320-20A/001, EK2320-20B/001, EK2320-21A/001, EK2324
GK / GKV: GK271, GK281, GKV361, GKV371
IC / IK: ICNS3324, ICP3324, ICP3334-21, ICS3234, ICS3334, ICUS2924, ICN3314-20, IK2320, IK2324, IK2720, IK3520, IK3524, IK1620-20, IK1624-20, IKS1620, IKS1624, IKS251, IKS261
RC: RCI5351, RCI5453
Were additional models found that did not appear in the study? You are welcome to check compatibility via the E-Nr number on the sticker.
How do I replace the front frame of the BioCool drawer?
The replacement does not require breaking walls or soldering – it involves simple removal and installation of a holding panel.
- Remove the BioCool drawer from the refrigerator by pulling it straight out.
- Release the existing front frame from the gripping points at the edges.
- Lift it gently and remove it from the drawer.
- Position the new frame parallel to the edge of the drawer and press until it clicks at both points.
- Place the drawer back on the rails and check that the slider moves freely.
⚠️ There is no need to disconnect the refrigerator from the power supply for this operation – it is a mechanical part only, without contact with electrical components.
Prefer an expert to install? Our service team is available to coordinate a professional installation.
💡 Tip from the experts
💡 Expert tip: Daniel recommends checking the slider movement before ordering – if it gets caught in the middle and doesn't reach the end, the common cause is a small fracture at the frame's catch point, and not a problem with the entire drawer. Replacing the frame alone, without the entire drawer, saves unnecessary cost.
❓ Frequently Asked Questions
What is the difference between a regular BioCool drawer and a BioFresh compartment?
BioFresh is the name of the separate refrigerator compartment with controlled temperature and humidity, and BioCool is the name of the specific drawer inside it with manual humidity regulation. Frame 7413438 belongs to the BioCool drawer inside the BioFresh compartment.
Is it possible to replace just the slider without the entire frame?
The frame and slider come as one unit from the manufacturer and are not sold separately. When there is a problem with the slider movement or a fracture in the attachment points, the entire front frame must be replaced.
How do I know if the frame is compatible with my refrigerator model?
The safest way is to compare the E-Nr number on the sticker on your model to the list of compatible models. You can also use the compatibility check button at the top of the page.
🚚 Shipping Information | ↩️ Transaction Cancellation and Returns










