Description

Original right/left rail for Sauter oven 8074594

The original Sauter oven rail 8074594 is a spare part for the right or left side of the baking chamber, which holds the baking racks and pans inside the oven. It is designed for built-in & freestanding electric ovens from the AFC55, AFC65 and AFG55 series, and ensures full stability for the racks at any selected height. Only the original part ensures a precise fit to the grooves in the oven wall and prevents movement during baking.

Are the oven shelves not sitting firmly? Do you feel like they are leaning to one side? It's time to replace the oven rail. A worn or bent rail causes pans to tilt to the side and foods to cook unevenly. Just before ordering – to ensure a successful replacement, only genuine parts must be used. Non-genuine parts may not fit into the slots and cause further damage. Now click the 'Check Model Compatibility' button at the top of the page and our system will immediately confirm that the part is suitable for your oven model.

Why is the oven rail so important to your baking chamber?

The oven rail is the side skeleton of the baking chamber. It holds every shelf and pan that is inserted into the oven, and allows you to choose between 5 different baking heights as needed. When it is worn, warped, or broken – the entire baking is compromised. In the experience of our technicians, a damaged rail in 60% of cases also causes scratches on the inner enamel wall of the oven, damage that accumulates over time.

What are the signs that the rail needs replacing?

The rail requires replacement when the oven shelf does not sit straight, when it “pops” out of the slots with a slight push, when there is obvious rust or warping of the metal, or when the shelf cannot be inserted smoothly. A worn rail is dangerous – a heavy pan may fall due to insufficient stabilization.

✅ Original rail guarantees:

• Complete stability at all 5 baking heights
• Uniform friction – shelves slide in and out smoothly
• High temperature resistance up to 250°C
• Keeping the inner enamel wall free of scratches

📋 Technical specifications

✅ Compatible models

The part is suitable for the following models (make sure it matches the model number on the device sticker):

• AFC5550WH
• AFC6550WH
• AFG5500WH
• AFG6550WH

🔧 How do you replace the oven rail?

Replacing an oven rail is a simple DIY task that takes about 10 minutes, and requires no tools at all. Turn off the oven and make sure it is completely cool before starting.

Replacement steps:

1. ⚠️ Make sure the oven is turned off and completely cold. Before touching the inner wall
2. Remove all shelves from the oven compartment.
3. Identify the locking tabs at the bottom and top of each rail.
4. Press the tab and pull the rail straight out of the slot.
5. Insert the new rail into the groove – bottom first, top last – until it clicks into place.
6. Repeat the process on the other side.
7. Insert a shelf and check that it sits securely and balanced.

Please note: AFC models have a top-down rail entry, while AFG models may have slight installation differences. If in doubt, refer to the oven's user manual.

💡 Tip from the experts

Based on our service visits, the main reason for premature wear of oven rails is neglect of regular cleaning. It is recommended to clean the rails after each intensive use, according to the cleaning instructions detailed in the oven's user manual. Regular cleaning prevents the accumulation of grease that makes sliding difficult and accelerates wear.

❓ Frequently Asked Questions

Where is the model sticker on the sauter oven?

The model sticker on sauter ovens is located on the steel frame inside – inside left side of the door frame, visible when the door is opened. The sticker lists the model number (for example AFC5550WH), serial number and power consumption. Enter the number into our compatibility checker for instant confirmation.

Is it possible to replace just one rail?

Yes, SKU 8074594 is a single rail – you can purchase the right or left rail separately as needed. However, in our experience, it is recommended to check the condition of the opposing rail – when one is worn, the other is usually to the same extent. Replacing both together ensures a uniform plane and accurate baking over time.

Is the rail suitable for the main oven only?

Yes. Part number 8074594 is for the main oven compartment in models AFC55, AFC65 and AFG55. On double models with integrated auxiliary oven – the auxiliary oven has separate rails with a different part number. Always check your exact model number before ordering.