Description

Original lint filter for Miele tumble dryer 6162751

The original Miele 6162751 fluff filter is designed for condenser tumble dryers from the T1xxx, T4xxx, T7xxx, T8xxx and T9xxx series. The part consists of a plastic frame with a dense mesh, is fully removable for cleaning, and is suitable for installation in the door opening on both sides. The filter captures fluff and fibers before they enter the internal mechanism – extending the life of the appliance.

Is the lint filter clogged? Here we order the original part and get the dryer working like new again.

What is the function of the fluff filter in a Miele condenser dryer?

The lint filter is the dryer's first line of defense. It traps fabric fibers, hair, and lint particles created during the drying process, preventing them from reaching and blocking the heat exchanger. A dryer that operates without a proper filter will overheat, use more electricity, and may break down prematurely.

From the experience of our technicians, over 40% of Miele dryer repair calls are directly caused by a lint filter that has not been replaced on time – or has worn out and is no longer filtering properly.

📋 Technical specifications

✅ Compatible models

The filter is suitable for the following Miele dryer series:

T1xxx series: T1322C, T1323C, T1329C, T1332C, T1333C, T1339C

T4xxx series: T4464C, T4465C, T4659C, T4659CI, T4804C, T4805C, T4809CI, T4839C, T4839CI

T7xxx series: T7644C, T7744C, T7746C, T7748C, T7760C, T7764C, T7780C, T7944C, T7946C, T7964C, T7984C

T8xxx series: T8012C, T8013C, T8019C, T8400C, T8401C, T8402C, T8403C, T8413C, T8422C, T8423C, T8424C, T8425C, T8428C, T8432C, T8433C, T8436C, T8453C, T8463C, T8602C, T8603C, T8622C, T8623C, T8624C, T8632C, T8633C, T8643C, T8663C, T8682C, T8685C, T8687C, T8688C, T8695C, T8802C, T8803C, T8822C, T8825C, T8828C, T8829C, T8835C, T8841C, T8842C, T8843C, T8902C, T8903C, T8905C, T8923C

T9xxx series: T9246C, T9256C, T9266C, T9268C, T9276C, T9446C, T9447C, T9466C, T9468C, T9476C, T9646C, T9647C, T9666C

Please note: The part does not fit all Miele models. Please compare the physical appearance of your part to the image shown before ordering. If in doubt – please contact us for compatibility confirmation before purchasing.

🔧 How do you replace the lint filter in a Miele?

Replacing the filter is very simple and does not require tools. The operation takes about 2 minutes and has a degree of zero difficulty - any device owner can do it themselves.

Step 1: Open the dryer door.

Step 2: Grab the old lint filter and pull it straight out of the door opening.

Step 3: Insert the new filter into the opening – choose right or left depending on the position that suits you.

Step 4: Make sure the filter sits firmly and level in the door opening.

Step 5: Close the door and check that the appliance is operating normally.

💡 Tip from the experts

When to replace – and not just clean?

The Miele lint filter can be cleaned repeatedly, but the mesh wears out over time. Signs to replace: A mesh with tears or holes, a broken plastic frame, and a filter that cannot be cleaned properly even after washing. When our technicians come to repair Miele dryers and find a damaged filter – we recommend purchasing only an original part. Unapproved replacement parts may appear to fit, but their mesh is coarser and misses fine lint – which eventually reaches the heat exchanger and damages it.

In our experience, cleaning the Miele fluff filter after every drying cycle – and not just when the warning light comes on – extends the life of the heat exchanger by at least two years.

❓ Frequently Asked Questions

How often should the fluff filter be cleaned on a Miele?

Miele recommends cleaning the fluff filter after each drying cycle. Minimal cleaning with each use prevents the build-up of fluff that slows down airflow, increases drying time and increases energy consumption. A clogged filter also causes the internal temperature to rise – which accelerates wear on parts.

Is filter 6162751 also suitable for my Miele dryer?

Check the model number on the specification sticker on the inside of the door – or on the back of the appliance. If your model is listed as T1xxx, T4xxx, T7xxx, T8xxx, T9xxx – the filter fits. If you are unsure, compare the appearance of your existing filter to the part picture before ordering.

What is the difference between an original Miele fluff filter and a replacement filter?

A genuine Miele filter meets the manufacturer's manufacturing requirements for mesh size, frame strength and flexibility. An unapproved filter may allow fine lint particles to pass through to the heat exchanger – causing damage that is far more costly than the cost savings of the part.