Description

Original lint filter for Miele tumble dryer Miele 7358910

The original Miele 7358910 lint filter is a spare part for the door opening of tumble dryers. The plastic frame with the mesh collects the fabric fibers and lint created during the drying process and prevents them from reaching the mechanism. Suitable for T4, T7, T8, T9 and PT series. Can be removed for cleaning and used on the right and left.

Did you know that a clogged lint filter is the number one cause of reduced Miele dryer performance? Lint that builds up on the mesh reduces airflow, extends drying time and can cause the appliance to overheat. A new genuine filter – and a damaged mesh that doesn’t filter properly – restores drying to peak performance.

A moment before ordering – safety above all! To ensure a successful repair and maintain the longevity of the device, it is mandatory to use only original parts. Now click the 'Check Model Compatibility' button at the top of the page and our system will immediately confirm that the part is suitable for you.

When should the lint filter be replaced?

A lint filter that is intact and performing its function does not cause problems – the problem starts when the mesh is torn, the frame breaks, or the filter no longer closes properly in the door opening. Signs of this: the dryer runs longer than usual, lint ends up in the washing drum instead of the filter, or the appliance overheats. Replacing a genuine filter – and not an unapproved replacement – ​​ensures that the mesh is exactly the right size and is installed with full tightness.

Tip for finding the model: The E-Nr sticker for your Miele dryer is located on the inside of the door. The model number starts with T or PT.

📋 Technical specifications

✅ Compatible models

Make sure it matches the model number on the E-Nr sticker on your dryer door.

PT Series (Professional / Double Dryers) PT5137WP, PT5140WP, PT5141WP, PT7137WP, PT9137WP

T4 Series T4809CI, T4819CI, T4839C, T4839CI, T4839CI ED, T4859CI ED

T7 Series T7850WP, T7950WP, T7952WP, T7953WP, T7954WP

T8 Series – First Group (T8000-T8099) T8000WP, T8001WP, T8007WP, T8019C

T8 Series – Second Group (T8600-T8699) T8626WP, T8627WP

T8 Series – Third Group (T8800-T8899) T8826WP, T8827WP, T8837WP, T8847WP, T8855WP, T8856WP, T8857WP, T8860WP, T8861WP, T8866WP, T8867WP, T8870WP, T8871WP, T8873WP, T8877WP, T8879WP, T8881S, T8883S

T8 Series – Fourth Group (T8900-T8999) T8926WP, T8927WP, T8929WP, T8937WP, T8939WP, T8947WP, T8957WP, T8961WP, T8964WP, T8965WP, T8966WP, T8967WP, T8968WP, T8969WP, T8970WP, T8971WP, T8976WP, T8978WP, T8986WP, T8987WP, T8989WP, T8991WP, T8997WP, T8999WP

T9 Series T9747WP, T9749WP, T9767WP, T9769WP, T9772WP

🔧 How do you replace the lint filter?

Replacing the lint filter is a very simple DIY operation – low difficulty level, no tools, only 2-3 minutes. No technician required.

1. Open the dryer door.
2. Grab the old filter in the door opening and pull it out.
3. Clean the installation area of ​​any remaining lint.
4. Insert the new filter into place - you can install it on the right or left side, depending on your convenience.
5. Make sure the filter is seated tightly and closed properly before turning on the dryer.

⚠️ Before any work – unplug the dryer.

💡 Tip from the experts

From our technicians’ experience, most customers who replace a lint filter find that the door also doesn’t close tightly – a sign that the old frame has worn and cracked over time. Before installation, check that the door opening is free of lint debris that has accumulated on the sides – 30 seconds of cleaning saves the problem of poor drying even with a brand new filter.

❓ Frequently Asked Questions

How many times a year should a Miele fluff filter be replaced?

Cleaning the filter after each drying cycle is recommended by Miele. A complete filter replacement is required when the mesh is torn, the frame is broken, or the filter no longer closes properly. In most homes, this happens every 3-5 years of use, depending on the frequency of washing and the quality of regular cleaning.

Will a non-genuine lint filter work in a Miele dryer?

A non-original filter may not fit exactly into the door opening – then fluff passes through the filter and ends up in the mechanism. The accumulation of fluff inside the appliance is a known cause of fires. The original filter 7358910 is manufactured in Miele factories and is designed for the exact opening of the compatible models.

Miele dryer takes a long time to dry – is the clogged filter the reason?

Yes, a clogged lint filter is the most common cause of prolonged drying. First, check if the filter is cleanable – if the mesh is torn or the frame is broken, replacement is the solution. If the problem persists after replacing the filter, the rear (condenser) filter may need cleaning.