The genuine C00685400 lint filter captures fibres, lint and fluff that are released from clothes during drying. It maintains free airflow, shortens drying times and prevents dangerous build-up. Fits Whirlpool AWZ, DDLX, DSCX and HDLX series tumble dryers and is an OEM genuine part.

Is your dryer taking too long? Are your clothes coming out damp? A cracked or saturated lint filter is often the culprit. Click the 'Check Model Compatibility' button at the top of the page now and make sure in seconds that the filter is exactly the right fit for your model.

Why is a proper lint filter in a dryer important?

A properly functioning lint filter is your first line of defense against long drying times and fire hazards. The filter traps lint before it blocks the vent. When the mesh is torn or clogged, air doesn't flow properly. As a result, the dryer works harder and uses more electricity.

Over time, soap and fabric softener residue accumulates on the mesh. Therefore, the filter loses its effectiveness even without a visible tear. Replacing it with an original filter restores the original airflow. In addition, it protects the heating element and the motor from overheating.

Lint is a highly flammable material. Because it accumulates in large quantities, a damaged filter increases the risk of fire. It is therefore recommended to replace a torn or deformed filter immediately.

Looking for SKU C00379873?

The device manufacturer replaced the old part number C00379873 with the current part number C00685400. This is an original and completely identical part – simply with an updated catalog number. Even those who have the old number will receive the exact same filter.

For more genuine spare parts and accessories, visit the Whirlpool brand page.

Original vs. Unapproved Replacement – ​​What's the Difference?

📋 Technical specifications

✅ Compatible models

The filter fits the following Whirlpool models (check the identification sticker for exact fit):

AWZ series: AWZ 10CD S/PRO, AWZ 10HP UK, AWZ 8CD S/PRO, AWZ 9CD S/PRO, AWZ8CD/PRO, AWZ9CD/PRO

DDLX series: DDLX 70110, DDLX 70111, DDLX 70112, DDLX 70113, DDLX 70114, DDLX 80110, DDLX 80111, DDLX 80112, DDLX 80113, DDLX 80114, DDLX 80115, DDLX 80116, DDLX 90110, DDLX 90111, DDLX 90112, DDLX 90113, DDLX 90114

DELX/DGELX series: DELX70112, DELX70113, DELX80113, DGELX80110, DGELX80111, DGELX90111

DSCX series: DSCX 10120, DSCX 10121, DSCX 10122, DSCX 10123, DSCX 10430, DSCX 70110, DSCX 70125, DSCX 80110, DSCX 80111, DSCX 80112, DSCX 80113, DSCX 80114, DSCX 80115, DSCX 80118, DSCX 80119, DSCX 90113, DSCX 90114, DSCX 90120, DSCX 90121, DSCX 90122, DSCX 90130 SL

HDLX series: HDLX 70310, HDLX 70311, HDLX 70312, HDLX 70313, HDLX 70314, HDLX 70315, HDLX 70316, HDLX 70410, HDLX 70411, HDLX 70412, HDLX 70414, HDLX 70510, HDLX 80310, HDLX 80311, HDLX 80312, HDLX 80410, HDLX 80411, HDLX 80412, HDLX 80413, HDLX 80414, HDLX 80511, HDLX 90410

♻️ Proper use and maintenance

The filter requires no installation – it is easily removed and replaced without tools. To get the most out of it, adopt simple maintenance habits:

Cleaning before each cycle: Run your finger over the mesh and remove the layer of lint. A ten-second operation that shortens drying time and maintains energy efficiency.

Thorough cleaning every six months: Wash both sides of the mesh with hot water. Use a soft nylon brush with a little liquid soap. This will remove any fabric softener and soap residue that sticks between the fibers.

Drying before returning: Dry the filter thoroughly with a towel before returning it. A wet mesh traps lint less well and can thicken it.

Integrity check: Check periodically for any tears or distortion in the mesh. A damaged filter loses its filtering ability and must be replaced with an original one.

Where is the model number? On tumble dryers, the identification number is usually printed on the inside of the door. Compare it before ordering to ensure it matches.

💡 Tip from the experts

💡 Expert tip: In our technicians' experience, the number one cause of long drying times is not a motor malfunction – but a transparent layer of fabric softener that sticks to the mesh. It is not visible but blocks about 30% of the air flow. Rinsing with hot water once a month returns the drying to its original rate and saves electricity. – Daniel

❓ Frequently Asked Questions

How often should you replace a lint filter in a dryer?

Lint filters are replaced when the mesh is torn, distorted, or does not clean even after washing. Routine cleaning before each cycle extends the life of the filter. However, a damaged mesh loses its filtering ability and risks obstructed airflow. In such a case, replace it with an original filter immediately.

Is the C00685400 filter also suitable for the old model with part number C00379873?

Yes. The part number C00685400 is the latest version that replaced C00379873. It is the exact same original part, just with an updated catalog number. If your device used the old number, this filter is fully compatible.

Why do clothes come out of the dryer damp?

The most common cause is a clogged or saturated lint filter with fabric softener residue. It blocks the airflow and prolongs drying. Clean the mesh thoroughly with hot water, and check that it is not torn. If the problem persists, a new original filter restores proper airflow.

🚚 Shipping Information | ↩️ Transaction Cancellation and Returns