Description

Original main control card for Miele induction hobs Miele 8132046

The Master3.1 gelb/G5 main control card (part number 8132045) controls the touch panel and display of Miele induction hobs. The part is compatible with models from the KM6 and KMDA4 series, and is supplied as an original OEM part in a 132g package.

Has the induction hob's touch panel stopped responding, or does the display freeze in the middle of cooking? According to electrical appliance technicians, most faults in induction hobs originate in the control board and not in the heating zones themselves.

A moment before ordering – safety above all! To ensure a successful repair and maintain the longevity of your stove, it is essential to use only original parts. Non-original parts may cause damage. Now click the 'Check Model Compatibility' button at the top of the page and our system will immediately confirm that the part is suitable for you.

What are the signs of a malfunction in the control card of an induction hob?

A malfunction in the control card is manifested by an unresponsive touch panel, a display that is off or flashing, and a stove that resets or turns off by itself in the middle of cooking.

Induction hobs are based on a central electronic board that translates pressing the touch panel into action on the heating zones. When the board is damaged, the hob continues to receive power but does not respond to commands, or displays an error code. A large proportion of cases described as “hobs not working” turn out to be a fault with the board and not with the heating element itself.

Why is it important to use an original control card?

A non-original control card may not be compatible with the operating voltage and specific wiring of the model, causing repeated malfunctions or an electrical hazard.

The original Master3.1 gelb/G5 control card is manufactured to Miele's exact specifications, including connections, display color and compatibility with the hob's control software. Using an original part maintains the electrical safety standard of the appliance.

For all original Miele spare parts, you can find a variety of additional components for stoves, built-in & freestanding ovens, and dishwashers.

Where do you find the model number (E-Nr) of the stove?

The E-Nr number of a Miele induction hob is usually found on a sticker on the bottom of the hob, near the electrical connection.

To see the sticker, you have to remove the stove from the countertop or bend under the cabinet. If there is no easy access, you can use the warranty certificate or purchase invoice, which sometimes indicate the exact model.

Original vs. Unapproved Replacement – ​​What's the Difference?

📋 Technical specifications

✅ Compatible models

The part is suitable for Miele induction hobs from the following series (ensure exact match with the E-Nr number on the sticker):

KM6 Series: KM6 Models… KMDA4 Series: KMDA4 Models…

In any case, use the 'Check Model Compatibility' button at the top of the page for a quick check by E-Nr.

🔧 How do you replace the control card on the induction hob?

Replacing the control card is a technical operation that requires disconnecting the power, disassembling the hob from the surface, and connecting delicate wiring.

⚠️ Important: Replacing the control card requires professional technical knowledge. It is recommended to call a qualified technician from the official service. Unprofessional installation may cause additional damage and compromise electrical safety.

Prefer an expert to install? Our service team is available to coordinate professional installation of the control card.

💡 Tip from the experts

Daniel, our service specialist, recommends: Before replacing a control card, also check the tightness of the surface around the touch panel. Moisture that seeps under the buttons causes faults that look identical to a card fault, so this check sometimes saves unnecessary replacement.

❓ Frequently Asked Questions

Why doesn't the induction hob respond to the touch panel?

Most often, the cause is a fault in the main control board and not in the heat sinks. The board receives power but does not translate the presses into action. Disconnecting the stove from the power supply for a few minutes does not solve the problem if the source of the fault is in the board itself.

Can I replace the control card myself?

Technically yes, but it is recommended to use a qualified technician. The replacement involves disconnecting the power, disassembling the hob from the surface, and connecting delicate wiring, and incorrect operation may compromise the electrical safety of the appliance.

How do you know that the problem is with the card and not a single heating zone?

If all the heating zones are not responding to the touch panel, or the display is completely off, it is usually the control board. A fault in a single heating zone will only affect that zone and not the entire hob.

🚚 Shipping Information | ↩️ Transaction Cancellation and Returns