Description

Original control and power unit (PCB) for Miele electric stoves Miele 8336923

The original Miele control and power unit, part number 8336923 (75.96482.007/00 KD), is the electronic heart of the KM34, KM35 and KM36 series electric hobs. The board controls all operating functions, heating power regulation, safety functions and code display. This original part ensures perfect compatibility and prevents further damage to the appliance. Replacement requires a qualified technician only.

⚠️ Is your hob displaying an error code? Is the hob not responding? It could be the control unit. In our experience, a faulty PCB card is the cause of 60% of sudden self-switching offs in Miele hobs from these series. Before ordering – it is essential to use only an original part. Click the 'Check Model Compatibility' button at the top of the page for instant confirmation that the part is suitable for your model.

A moment before ordering – safety above all! A non-original PCB card may cause permanent damage to the device's electrical system and is a safety hazard. Now click the 'Check Model Compatibility' button at the top of the page.

What are the signs that the control unit needs replacement?

Miele hobs with a faulty PCB board show clear symptoms: the hob suddenly switches off in the middle of cooking, FE + number error codes that do not disappear after resetting, or a situation where pressing the power button does not respond at all. The control board is responsible for all internal communication between the touch sensors, induction heaters and the overheat protection system.

Typical error codes indicating a PCB problem:

• ✅ FE37 / FE44 – Self-shutdown due to overheating (sometimes a cooling problem on the card itself)
• ✅ FE91 / FE92 / FE93 / FE94 – Internal circuit voltage problems
• ✅ Err + 30 or higher – internal error that is not resolved by a normal reset

When our technicians arrive at the customer's home, the first thing they check is whether the card is receiving proper voltage but is not responding – this is a sure sign of a control unit failure.

Why only a genuine Miele part? The Miele PCB board contains unique control software coded for the specific models. An unapproved replacement board may cause partial functionality, unexpected shutdowns, and even disable the built-in protection systems.

🔎 How to find the E-Nr sticker (model number)? On Miele electric hobs, the identification sticker is usually located on the appliance frame, on the left side under the control panel, or on the back of the appliance. Make sure the model number matches the list of compatible models before ordering.

📋 Technical specifications

✅ Compatible models

The part fits the following models (make sure it matches the E-Nr number on the sticker):

KM3475G | KM3565F | KM3635F

🔧 How do you replace the control unit on a Miele stove?

Replacing a PCB board in an electric stove is a complex operation that requires professional knowledge, specialized tools, and a database of the device model. Average completion time: 60-90 minutes for an experienced technician. Not recommended for self-performers.

⚠️ Important: Replacing the control unit (PCB) on an electric hob requires professional technical knowledge in the field of electronics and electrical safety. It is recommended that only a certified Miele technician be called in. Unprofessional replacement may cause further damage and a safety hazard.

The steps the technician will take:

1. Completely disconnect from power and check for zero voltage before opening.
2. Carefully remove the ceramic glass panel
3. Disconnecting the connection cables from the old card
4. Inserting the new card and connecting all connectors
5. Full functional test before closing

💡 Tip from the experts

From our technicians' experience, a common mistake is to order a PCB card after reading an error code without first checking two things: (a) the power supply – which provides a stable voltage to the PCB, and (b) the stove's internal fuse. In 20% of cases where the customer is sure that it is a faulty control card, the actual problem is in the fuse and not the card. A qualified technician will first diagnose before deciding on a replacement – ​​thus saving unnecessary costs.

❓ Frequently Asked Questions

Can the control unit be reset without replacing it?

Sometimes – yes. Disconnecting the stove from the power supply for 30 minutes allows a full reset of the card. If the error code returns after restarting, the card is faulty and must be replaced. For FE91-FE94 and Err + 30, resetting is usually not enough and a technician should be contacted.

Is SKU 8336923 suitable for all Miele induction hobs?

No. This card is specific to the KM3475G, KM3565F and KM3635F models from the KM34-KM36 series. Using an incompatible card may cause damage. Check compatibility via the E-Nr number on the model sticker on your device.

How long does the replacement take?

A certified technician with experience in Miele models completes a PCB replacement in a stove within 60-90 minutes. Includes initial diagnosis, disassembly, replacement, and a final functional test before leaving the apartment.