Description

Original right door hinge for Miele top loading washing machine Miele 5784630

Original metal lid hinge from Miele, part number 5784630, designed for the right side of top-loader washing machines. The part allows the machine lid to open and close properly and is suitable for many models in the W100, W200 and W600 series. Replaces old parts numbers 5667580 and M5667580. Completely original part from the manufacturer Miele.

Is your machine's lid closing crookedly, wobbling, or has the hinge broken completely? Now is the time for a simple solution. The lid hinge is one of the most accessible spare parts for Miele top-loaders to replace yourself – no technician, no special equipment. Check that your model is compatible in the list below, and your lid will open like new.

Why doesn't the washing machine lid close properly?

In most cases, a faulty hinge is the direct cause. The hinge is the main pressure point every time the lid is opened and closed – and over the years the metal protrusions become dull and lose their grip. Models in the W1, W2 and W6 series are known for lasting for many years, but the hinge itself is subject to daily mechanical wear and tear. The common sign: the lid doesn’t lie flat, falls to the side, or opens at the wrong angle, making it difficult to load the laundry.

From the experience of our technicians, about 85% of cases where the customer reports “lid not working” – end up with just replacing the hinge. Not the entire lid, not technician work. Just that part.

📋 Technical specifications

✅ Compatible models – W100, W200, W600 series

The part fits a variety of Miele top-loader washing machine models:

W100 Series: W140, W141 W200 Series: W161, W254 W600 Series: W616, W617, W679

How do you find the model number (E-Nr) of your machine? The model sticker is located on the inside of the machine lid. Open the lid and check the inner lip - there you will find the number.

🔧 How do you replace a lid hinge on a top-loader washing machine?

Difficulty level: Easy. Time to complete: Approximately 15-20 minutes. Required: Phillips screwdriver only.

1. Make sure the machine is not working.
2. Open the lid all the way and support it in a stable position.
3. Locate the two old hinge screws on the right side of the lid opening.
4. Loosen the screws only 3-4 turns – do not remove completely yet.
5. Hold the old axle in your hand and loosen the screws completely.
6. Place the new hinge in exactly the same location.
7. Tighten the screws and run the machine for testing.

⚠️ Important: Before ordering, check that the model number appears in the list of compatible models above. A hinge without an exact fit will not allow proper closing.

💡 Tip from the experts

The most common mistake we see: Customers who replace a working hinge due to a lid that closes poorly – when the real problem is in the locking mechanism’s control screw. Before replacing, perform a simple test: open and close the lid slowly. If the hinge itself wobbles at the point of connection to the machine body – the hinge is faulty. If it is stable but the lid does not “lock” when closed – the problem could be in the locking mechanism, not the hinge.

In our experience, every customer who has replaced the original Miele hinge (and not an unapproved replacement) has reported that the lid is back to working just like new. An unapproved part often requires “rounding corners” during installation – and introduces uneven tension that wears out other parts.

❓ Frequently Asked Questions

What is the difference between the right and left axis in a top-loader washing machine?

The right hinge (5784630) is located on the right side of the lid opening and is responsible for its right pivot. The left hinge is a completely separate part. Check which side your lid is swinging from – that is the side that is broken. Most Miele top loaders use the right hinge as the main pivot point.

Can the axle be replaced by yourself without a technician?

Yes. Replacing a lid hinge on a Miele top-loader is one of the easiest replacements. It only requires a Phillips screwdriver and takes about 15-20 minutes. It is important to unplug the machine before starting work, and tighten the new screws evenly.

Is SKU 5784630 also compatible with W1, W2, W6 series?

Yes. The W1, W2 and W6 series include certain models that the part is compatible with – but it is important to verify against the full model number (E-Nr) on the inside lid sticker. There may be models within the series that use a different axis. The list of verified models is listed in the “Compatible Models” section above.