Description

Original right hinge (KPL) for Miele oven door Miele 9536170

Genuine Miele Complete Right Door Hinge (KPL), part number 9536170, which includes a drive mechanism and springs designed to support the smooth opening and closing of the oven door and to carry the weight of the door. Suitable for Miele built-in & Freestanding Ovens built in the H6000 and H6500 series, including models H6160B, H6260B, H6360B, H6461B, H656B1 and H6561B. Original spare part from the manufacturer - fits exactly and does not require adjustments.

Is your oven door falling, opening hard, or not staying open at a stable angle? This is a classic sign of a worn hinge. The original hinge 9536170 brings back the quiet, controlled opening you know – and it comes as a complete kit with the drive mechanism and springs, so there’s no need to purchase additional parts.

Why does the oven door behave like this?

The hinge makes dozens of turns a day, under high heat and the full weight of the door. In the experience of our technicians, most door failures originate in the hinge and not in the door itself. When the spring weakens, the door loses its controlled movement and begins to drop sharply, remain open in an unstable position, or close with a squeak. Replacing the original hinge – instead of trying to “fix” it – solves the problem permanently.

✅ Complete kit (KPL) – drive mechanism and springs included, ready for direct installation ✅ Genuine Miele part – 100% accurate dimensions, no compromises ✅ Compatible with H6000 and H6500 series – check model before ordering ⚠️ Important: Non-original parts may not fit in size and cause accelerated wear of door accessories

📋 Technical specifications

✅ Compatible models

H6160B, H6260B, H6360B, H6461B, H656B1, H6561B

⚠️ Important: Find the model number on the identification sticker on the inside frame of the oven door before placing your order.

🔧 How do you replace a Miele oven door hinge?

Difficulty level: Technician recommended – the operation involves complete disassembly of the oven door and requires technical experience.

1. Prepare the device – Disconnect the oven from the power supply before any work.
2. Open the door completely. – Open all the way and find the hinge latches on both sides.
3. Release the hinge clips. – Move them to the “release” position (usually upwards).
4. Lift the door off the rails. – Tilt slightly and pull upwards until it separates from the oven.
5. Remove the old hinge. – Loosen the screws holding the right hinge in the door body.
6. Insert the new axle. – Place the 9536170 axle manually, screw it back in.
7. Put the door back. – Put it back in the latches, check that it closes with a light touch.

💡 Tip from the experts

The most common mistake we see: Customers replace only one hinge. In our experience in the field, when one hinge is worn out – the other hinge has been through the same load and is usually in an early stage of wear. We recommend replacing both hinges together – this ensures balanced opening and extends the life of the other door components.

Another tip: After installation, check that the door closes with a light push and does not “fall” forward. If the door drops too quickly, the spring may not have fully engaged and should be removed and reinserted.

❓ Frequently Asked Questions

My oven door drops sharply downwards – is it the hinge?

Yes, in most cases it does. A sudden drop of the door is the most obvious sign of a weak hinge spring. The spring built into the hinge regulates the opening speed. When it weakens, the door loses its braking mechanism and drops sharply. Replacing the original hinge 9536170 solves the problem.

Can I replace the axle myself or do I need a technician?

We recommend contacting a qualified technician. The operation involves complete disassembly of the oven door – a job that requires technical experience and can cause damage if not performed correctly. An experienced technician completes the replacement in about 30 minutes.

Does the hinge come with the springs or do you have to buy them separately?

The 9536170 hinge comes as a complete kit (KPL) – the drive mechanism and springs are already included. There is no need to purchase any additional components. The hinge is ready for direct installation.