Description

Original right rail bracket for Liebherr refrigerator drawer 743049400

The Liebherr right rail bracket 743049400 is an original spare part intended for the drawers in the refrigerator compartment of Liebherr refrigerators. The part returns the drawer to smooth and stable movement after the original bracket has broken or worn out. Suitable for the lower drawers in the refrigerator compartment, manufacturer part number 743049400, also known as 7430494. Self-replacement is possible with basic tools.

The vegetable drawer no longer falls out? The most common cause is a fracture in the right rail bracket. The original Liebherr part 743049400 solves the problem directly – the bracket fits exactly into place and restores full stability to the drawer. Non-original parts may change the angle of the drawer and cause damage to the refrigerator compartment.

A moment before ordering – safety above all! To ensure a successful repair and maintain the longevity of the device, it is mandatory to use only original parts. Non-original parts may cause damage and void the warranty. Now click the “Check Model Compatibility” button at the top of the page and our system will immediately confirm that the part is suitable for you.

Why does the drawer collapse or fall off the rails?

The right rail bracket is the small plastic component that holds the drawer slide rail glued to the right side of the refrigerator. When it breaks – usually due to overloading, forcing the drawer in, or natural wear and tear over the years – the drawer loses its right-hand anchor. The immediate result: the drawer tilts to the side, falls forward, or refuses to close properly. In the experience of our technicians, 80% of cases of a stuck drawer in the refrigerator compartment are resolved by replacing the bracket alone – without the need for a technician.

Replacing with a genuine Liebherr part guarantees two things that a replacement part cannot: precise adjustment of the rotation dimensions to the Liebherr rail angle, and resistance to the low temperatures of the cold store for years. The plastic of non-approved parts may crack again within months.

Where is the model sticker (E-Nr) on a Liebherr refrigerator?

On most Liebherr refrigerator models, the model sticker is located on the right-hand inside wall of the refrigerator compartment – ​​usually at eye level or above the top shelf. On models with a bottom vegetable drawer, sometimes the sticker is behind the bottom drawer – pull it out for a moment to see. The number you need is the E-Nr – a series of numbers and letters that starts with “E” or “ICB” / “IRE” and so on.

📋 Technical specifications

✅ Compatible models

Please note: This bracket fits a wide range of Liebherr models. Check compatibility by the E-Nr number on the model sticker on your refrigerator. According to information from authorized parts sources, the part is compatible with models including the CBP, EKB, ICB, IKB, IRE series and others. To check exact compatibility for your model – click the compatibility check button at the top of the page.

🔧 How do you replace the right rail bracket on a Liebherr refrigerator?

The replacement is of low difficulty and takes about 5 to 10 minutes. No special tools are required - a small flat screwdriver at most.

1. Pull the drawer out of the refrigerator completely – lift forward and up.
2. Locate the old or broken bracket on the right side of the refrigerator compartment.
3. Remove the remains of the old bracket – it is usually simply dropped from the grip
4. Press the new bracket 743049400 into the opening until you hear a “click”
5. Put the drawer back in – place the right side on the rail first

💡 Tip from the experts

In our experience, when one bracket breaks, the other (left side) is usually also in advanced stages of wear. It is recommended to order the left rail bracket (part number 9097267) at the same time and replace both together. An operation that takes just a few extra minutes that saves a second visit after a month or two – this is one of the tips that our technicians repeat over and over again.

To purchase the left bracket

❓ Frequently Asked Questions

What is the difference between SKU 743049400 and 909728500?

Both part numbers refer to the same part. 743049400 is the older manufacturer part number, and 909728500 is the current part number that Levhar has issued for the same part. Both numbers are valid for searching and ordering – the physical part is exactly the same. If you are searching and cannot find it, also try the short version 7430494.

Is it possible to replace the bracket without disassembling the refrigerator?

Yes. There is no need to disassemble anything from the refrigerator itself. Pull the drawer out completely, replace the bracket on the inside wall of the refrigerator compartment, and put the drawer back in. The entire operation is done outside the refrigerator and without touching the wiring, compressor, or any other component. Difficulty level: Low.

The vegetable drawer falls out even after I replaced the bracket – what is the reason?

If the drawer still drops after replacing the bracket, the next most common cause is wear on the rail itself, not the bracket. Check that the telescopic rail (the sliding part) itself is not damaged or bent. Rails can be ordered separately. In rare cases, the opening where the bracket sits in the refrigerator wall has cracked – contact a technician for diagnosis.