Description

Original shaving head for Philips shaver 422203618111

The original Philips shaving head 422203618111 is the complete cutter unit for the QC5550, QC5580 and QS6140 series shavers. It includes the outer metal foil and the two inner shaving blades – everything you need for a close and close shave. Original Philips part number only.

A shave that has suddenly become rough, uneven, or the machine is pulling hairs instead of shaving? This is a classic sign that the shaving head has reached the end of its life. Replacing the original shaving head restores the machine to full performance – without the need for a technician.

Why does the shaving head wear out and how long should it last?

An original Philips shaver head is designed to last for about a year to a year and a half of daily shaving. The metal foil and the inner blades wear together, which is why Philips sells them as one unit. When one wears out, the other is no longer sharp enough, even if it looks intact.

In our experience, the most common mistake is to replace only the mesh and keep the old blades – or vice versa. When the blades are not as sharp as the mesh, you don’t feel the full difference. An original head that includes both components together is the right solution.

📋 Technical specifications

✅ Compatible models

The following Philips shavers (sold in Israel):

• QC5550/15
• QC5580/13
• QC5580/15
• QC5580/32
• QC5580/40
• QS6140/15
• QS6140/30
• QS6140/33

Before you buy: Make sure your machine's model number is listed. The number is usually printed on the back of the device or inside the crank that holds the shaving head.

🔧 How do you replace a Philips shaver head?

Replacing the shaving head is a simple DIY operation – it takes about two minutes, no tools are required, and there is no risk of damaging the machine. Here's how to do it:

1. Turn off the machine. – Make sure the machine is turned off before any action.
2. Open the crank. – Press the release buttons on both sides of the shaving head and lift it upwards.
3. Take out the old knives. – The two inner blades (the white components) came out separately. Set aside.
4. Remove the old mesh. – The outer mesh is removable with a light press.
5. Insert the new network – until it clicks.
6. Insert the new knives. – Each blade to its socket, make sure they are straight.
7. Close the crank. – Press until it clicks into place.

💡 Tip from the experts

No need to oil or adjust – Philips original head comes calibrated and ready to use right away. Unlike non-original parts that sometimes require a few days of “running in” to stabilize, the original head delivers a smooth shave the first time.

In our experience, customers who replace an original Philips shaver head with the exact model report a 100% reduction in hair pulling – because an ill-fitting head, even if “close,” creates minimal gaps that are enough to pull.

❓ Frequently Asked Questions

What is the difference between an original razor head and a non-original one?

A genuine Philips shaver head is manufactured to the exact same specifications as the original head that came with the machine – with the same stainless steel, the same distance between the foil and the blades, and the same flexibility in the foil. A non-genuine part may look similar but often causes skin irritation, an uneven shave, and may shorten the life of the motor.

Is it possible to replace just the mesh without the knives?

Philips sells the foil and blades together as one unit – for good reason. When the two components wear out together, replacing just one creates an imbalance that affects the shave and the motor. The 422203618111 shaving head includes both components and allows for a complete replacement at once.

Is the shaving head suitable for wet shaving?

The blades themselves are water resistant, but check your device manual to see if your specific model is designed for wet shaving – not all QC5550 and QS6140 models are designed for use underwater. The shaving head itself is compatible with all models on the list.