Description
Original suction hose for Philips vacuum cleaner 432200538251
The CP0494/01 flexible suction hose transfers air and dust from the brush to the vacuum cleaner's collection container, preventing air leaks along the way. It is 165 cm long and fits Philips PowerPro Compact (3000 Series) vacuum cleaners. This is a genuine OEM part with an exact fit to the suction opening.
Do you run your hand over the hose while the vacuum cleaner is running and feel a stream of air escaping? This is the first sign of a crack or hole in the hose. The flexible hose is exposed to repeated bends and proximity to the motor, so it is one of the parts that wear out faster than others in the vacuum cleaner.
A moment before ordering – safety above all! To ensure a successful repair and maintain the longevity of the device, it is mandatory to use only original parts. Non-original parts may cause damage. Now click the 'Check Model Compatibility' button at the top of the page and our system will immediately confirm that the part is suitable for you.
Why does the vacuum cleaner lose suction power even when the filter is clean?
Most often, the cause is an air leak from the suction hose, not the filter. When there is a crack in the hose, some of the air is sucked in from the crack rather than the brush, and the actual suction power decreases.
In the experience of technicians, most cracks develop in the area where the hose connects to the pump body, due to repeated bending at the same point with each use. The original hose is made of a material that is resistant to bending, and maintains a full seal for longer than an unapproved replacement.
Where is my model? The model number of your vacuum cleaner is located on a sticker on the body of the appliance, starting with the letters FC followed by numbers. Check the sticker before ordering to ensure an exact match.
You can find all original Philips spare parts in our variety of categories.
Original vs. Unapproved Replacement – What's the Difference?
| parameter | Original part (OEM) | Unapproved replacement |
|---|---|---|
| opacity | Accurate to the suction opening | Not guaranteed, prone to air leakage |
| Bending resistance | Full product life | Accelerated wear and tear |
| Suction power | Remains normal. | Decreases over time |
📋 Technical specifications
| attribute | value |
|---|---|
| Manufacturer's SKU | CP0494 / 01 |
| brand | Philips |
| GTIN / EAN | 8710103816614 |
| compatibility | PowerPro Compact Series (3000 Series) |
| Part type | Flexible Suction Hose |
| Length | 165 cm |
| צבע | Black / Silver |
| התקנה | Simple click connection – suitable for DIY |
✅ Which models are suitable for the suction hose?
The part fits the following models (make sure it matches the model number on the sticker):
PowerPro Compact (3000 Series): FC9328, FC9329, FC9330, FC9331, FC9332, FC9333, FC9334, FC9349, FC9350, FC9351, FC9352, FC9531
🔧 How do you replace the suction hose on a vacuum cleaner?
The replacement is simple and does not require tools, and can be done in a few minutes. The connection is a click connection that is inserted and removed with a click, without screws.
⚠️ Before you start, turn off the vacuum cleaner and unplug it from the outlet, for safety reasons.
- Press the release buttons on the suction opening on the vacuum cleaner body and gently pull out the old hose.
- Remove the telescopic rod from the end of the old pipe.
- Attach the telescopic rod to the handle of the new hose.
- Insert the end of the new hose into the suction opening on the vacuum cleaner body until you hear a click.
- Turn on the vacuum cleaner for a short test and make sure there is no air leak in the connection area.
Would you prefer an expert to install for you? Our service team is available to coordinate a professional installation.
💡 What expert tip is worth knowing before replacing?
Daniel, our service specialist, recommends checking the entire length of the old hose before ordering. Running your hand over it with the vacuum running will quickly detect air leaks, even without a visible crack. This way you can confirm that the problem is in the hose and not elsewhere.
❓ Frequently Asked Questions
Can a cracked suction pipe be repaired or does it need to be replaced?
In most cases, it is recommended to replace rather than repair. A temporary repair with insulating tape impairs the tightness and suction power, and does not last long. An original hose ensures complete tightness and a precise fit to the suction opening.
How do you identify that the suction tube is the cause of the decrease in suction power?
Turn on the vacuum cleaner and slowly run your hand along the hose. If you feel a stream of air escaping from the hose itself, there is probably a crack or hole in it. Also check the area where it connects to the vacuum cleaner body, where cracks most commonly form.
Where can I find the model number of my Philips vacuum cleaner?
The model number is located on a sticker on the body of the vacuum cleaner, starting with the letters FC followed by numbers. Check the sticker before ordering to ensure an exact fit, and if in doubt, use the Model Compatibility Check button at the top of the page.
🚚 Shipping Information | ↩️ Transaction Cancellation and Returns







