Description

Original top cover for Breville Juice Fountain SP0002322 juicer

The original Breville SP0002322 top cover is a direct replacement part for the Juice Fountain Multi-Speed ​​Juicer model BJE510XL. The cover restores the full locking function of the juicer, prevents juice splashing (splashing - spreading drops to the sides) during operation and ensures safe operation. Manufactured according to original specifications and also replaces older versions (BJE510XL/03). Suitable for self-replacement without the need for tools.

The juicer will not start the motor when the lid is not properly locked – this is a built-in safety mechanism. When the lid is broken or cracked, the juicer will refuse to operate at all. Click the “Check Model Compatibility” button at the top of the page for instant confirmation that the part is suitable for you.

A moment before ordering – safety above all! To ensure a successful repair and maintain the longevity of the device, it is mandatory to use only original parts. Non-original parts may cause damage and void the warranty. Now click the “Check Model Compatibility” button at the top of the page and our system will immediately confirm that the part is suitable for you.

What causes the juicer lid to break?

The top lid of the Breville juicer is made of hard plastic that withstands operating pressure, but like all plastic – it wears out over time. The most common reasons: a fall, a broken locking tab, a cracked over-tightening, or simply wear and tear after many years of daily use. ✅ A genuine part ensures that the locking mechanism will work as it did when the device left the factory.

The Breville safety mechanism is designed so that the juicer will not operate without a locked lid. This protects you from juice splashing to the sides and being hit by the rotating blades. When the lid is broken, the juicer detects that the lock is not complete and refuses to start the motor. An unapproved replacement may not lock properly and endanger you.

From the experience of our technicians, about 80% of the times when a Breville juicer does not start the motor – the reason is a lid that does not lock properly and not an electrical fault. Before deciding that the motor has broken down, it is worth checking the condition of the lid.

📋 Technical specifications

✅ Compatible models

The part fits the following models (make sure it matches the model number on the bottom of the device):

• BJE510XL – Ikon Juice Fountain W/Display
• BJE510BSS1BCA1 – The Juice Fountain Multi-Speed

If your model is not listed – click the Check Compatibility button at the top of the page before ordering.

🔧 How do you replace the top lid on a Breville juicer?

Replacement is completely simple and requires no tools. Disassemble the juicer by removing the individual components (juice cup, mesh filter, and fruit holder), pull the old lid up and release it from the latches, install the new lid until you hear a locking “click,” and check that the locking mechanism is working before operating.

⚠️ Important: Before replacing – unplug the juicer. After assembly – make sure the lid is completely locked before pressing start.

Replacement steps:

1. Unplug the juicer from the power outlet.
2. Remove the juice cup and waste cup.
3. Remove the mesh filter with the washer.
4. Hold the juicer body steady and remove the old lid.
5. Insert the new cover – align the tabs and press down.
6. Assemble the remaining components and run for testing.

💡 Tip from the experts

From the experience of our technicians, the most common reason for premature breakage of a Breville lid is trying to operate the juicer when there is a blockage in the blade – the pressure created exceeds the strength of the locking tab and breaks it. Before each operation – make sure that there is no large piece of fruit blocking the blade. Cut hard fruit (beets, thick carrots) into slices before inserting into the juicer. This simple action extends the life of the lid for many years.

❓ Frequently Asked Questions

Why won't the juicer turn on after I replaced the lid?

The juicer requires all components to be locked precisely in order to operate the motor. Make sure the lid locks all the way into the lug – you must hear a clear click. Also check that the juice cup is properly attached and that the side locking mechanism is pressed all the way in. If the problem persists – there may be another component that is faulty.

Will a non-original lid fit the Breville BJE510XL juicer?

An unapproved part may not fit exactly into the lugs and not lock properly, which will cause the juicer to not turn on. Worse still – a lid that does not meet standards may break during operation and pose a safety hazard. The original part SP0002322 comes with verified exact dimensions and ensures a perfect lock.

Where is the model number on my Breville juicer?

The model sticker is located on the bottom of the juicer body. Carefully turn the device over and you will find the model name (e.g. BJE510XL) and the serial number. It is important to check the model before ordering – there are slight differences in the lid design between the different BJE510 models.

How long does the replacement take?

The replacement takes about 2 minutes without tools. Install the new lid, check the lock, install the other parts – and you're done. There is no need to disassemble the juicer body, disassemble the electrical system, or perform any complex technical operations.