Description

Original V-belt 5 EPH×384 for power transmission in Miele tumble dryer Miele 9010741

Genuine Miele V-belt, part number 9010741, is the main drive belt in PDR, TC, TD, TW and TX series dryers. Measuring 5 EPH x 384, the belt connects the motor to the drum shaft and enables its rotation. Without a proper belt, the drum stops completely. This is the only genuine part that is precisely sized for Miele models.

Is your dryer running, but the drum won't spin? Is your laundry staying wet? According to our technicians' experience, in over 96% of cases – the belt is to blame. Order the original part and allow a certified technician to finish the job in about an hour.

Why does the ligament tear – and what are the first signs?

A V-belt is a mechanical part that is exposed to constant heat and wear. Natural wear and tear over the years, an overload of unspun laundry, or foreign objects that have entered the drum – all can cause a tear. The simplest sign: the dryer turns on, the motor runs and heat comes out – but the drum does not move at all. This is a clear sign of a torn belt, not a motor malfunction.

From the experience of our technicians: When the engine is running but the drum is silent – ​​in 96% of cases the belt is the problem. Only 4% of cases require checking another component.

📋 Technical specifications

✅ Compatible models

PDR1108HP, PDR300HP, PDR507HP, TCA220WP, TCB140WP, TCC220WP, TCD260WP, TCD360WP, TCD440WP, TCE520WP, TWI680WP, TWL680WP, TWL780WP, TWR780WP, TWV680WP

Important: Check the model number (E-Nr) on the appliance label. The model label on Miele dryers is located on the inside of the door.

🔧 Can I replace the strap myself?

Replacing the V-belt in Miele dryers is a professional job that requires a qualified technician. The reason: Accessing the belt requires dismantling the front panel, disconnecting electrical connections, and installing the belt under a certain tension around the tensioning pulley. An incorrect process can cause damage to other components and the engine.

Tools required for technician: Phillips screwdriver, flat screwdriver, sometimes a tension wheel holder. Estimated work time: 45-75 minutes, depending on the model.

⚠️ Warning: Do not attempt self-replacement without proper training. Exposure to electrical components requires complete disconnection from power before any work.

💡 Expert Tip: The Hidden Cause of Premature Tearing

The most common mistake we see in the field: putting laundry that has just come out of the washing machine without squeezing it sufficiently. Overly wet laundry can double the weight on the belt – and shorten the belt’s life from 5-8 years to less than 2 years.

The simple rule: Make sure the laundry has been spun at least 1000 rpm before putting it in the dryer. This will significantly extend the life of the next strip.

❓ Frequently Asked Questions

Why is my dryer working but the laundry isn't drying?

If the motor is running, the heat comes out but the drum does not rotate – the belt is broken. This is a mechanical fault separate from the heating system. The clothes do not dry because they do not move inside the hot air duct. Replacing the original belt 9010741 solves the problem in 96% of cases.

What is the difference between a regular V-belt and a serrated V-belt (EPH)?

The EPH belt is a V-belt with a serrated profile on the inside. The serrations increase the contact area with the drive pulley and prevent slipping under high loads. For the Miele models listed above – only the 9010741 serrated belt is sized correctly and will function properly over time.

How long should a strap last?

A genuine Miele belt that is properly installed and operated with the appropriate amount of laundry lasts an average of 5-10 years. In our experience, belts that have been replaced with non-genuine parts return to the same fault after only 12-18 months.