Description

Pair of original Miele dryer door filters Miele 12497060

The original Miele 12497060 filter pair are the door filters – upper and lower – designed for T4, T7, T8 and T9 series tumble dryers. Together, the two filters capture lint and textile debris during each drying cycle, preventing the drying system from becoming blocked. Original filters ensure a perfect fit to the door track and maintain the performance of the appliance for years to come.

Does your Miele dryer display a “Clean Filters” indicator? This is the correct original set. Unlike conventional clothes dryers with only one filter, Miele installs two filters in the door opening – a double filtration system that ensures maximum airflow and protects the heat exchanger from overload.

Click the “Check Model Compatibility” button at the top of the page – instant confirmation that the set fits your device exactly before ordering.

Why does a Miele dryer need two filters in the door?

The two filters in the door – upper and lower – work together as the first line of defense in the filtration process. The upper filter captures most of the lint, and the lower filter (with a yellow button handle) finishes the job and prevents particles from passing to the next stage. ✅ In our experience – cleaning both filters after each drying cycle prevents extended drying time and significantly reduces electricity consumption.

Miele designed this system as part of a multi-stage filtration architecture: two door filters + a base filter (Plinth) that protects the heat exchanger. Original filters are made of a plastic frame with a mesh that is exactly the size of the specification – they sit “solidly” in the door opening and leave no gaps that allow lint to pass directly into the mechanism.

What happens when you use a non-original filter?

Non-original filters, even if they look similar, can have dimensional differences of just a few millimeters. Lint passes through these gaps directly towards the heat exchanger. The result: overloading, poor drying, and often an expensive service call.

✅ The original part ensures a perfect fit for the style of your Miele dryer ✅ The filter mesh is manufactured according to the original product specifications ✅ Can be inserted from both the right and left - complete flexibility

Location of the model sticker (E-Nr): On Miele dryers, the sticker is usually located on the inside of the door frame, or on the back panel of the appliance. The model number starts with a T (for example: T8826WP).

📋 Technical specifications

✅ Compatible series

The set is suitable for Miele dryers from the following series (must be verified against the full E-Nr number on the sticker):

• T4xxx series – T4163, T4263C, T4463C, T4804C, T4805C and more
• T7xxx series – T7734, T7744C, T7850WP, T7950WP, T7964C and more
• T8xxx series – T8302, T8403C, T8623C, T8826WP, T8827WP and more
• T9xxx series – T9167, T9268C, T9468C, T9666C, T9767WP and more

⚠️ Not suitable for all models – compare the filter to the image shown before ordering.

🔧 How do you replace and clean the door filters?

Cleaning the filters is a simple daily task that takes about 2 minutes and does not require tools. Upper filter – pull forward to remove. Lower filter – turn the yellow knob in the direction of the arrow until it clicks, then pull forward.

Cleaning steps:

1. Open the dryer door.
2. Remove the top filter – pull forward.
3. Remove the bottom filter – turn the yellow knob until it clicks, pull forward.
4. Remove the trapped lint – manually or with a vacuum cleaner with a crevice nozzle.
5. Wipe the plastic and mesh surfaces with a damp cloth – this is the standard cleaning after each cycle.
6. For deep cleaning as needed – rinse under lukewarm tap water. Important – Dry completely before returning, a damp filter may cause a sensor error
7. Replace the bottom filter until it clicks, then the top one.
8. Close the door.

⚠️ Miele dryer displays a “Clean Filters” indicator after several cycles – this is a reminder to clean, not a malfunction.

💡 Tip from the experts

In our technicians’ experience, the number one reason for long and ineffective drying in Miele dryers is insufficiently cleaned filters – not a filter that needs replacing. 70% of customers who contacted service due to poor drying resolved the problem by thoroughly cleaning both the door filters and the base filter, without the need for a technician. For filters that have been rinsed under water – wait for it to dry completely for at least an hour before replacing.

❓ Frequently Asked Questions

Does the set also include the base filter (Plinth)?

No. SKU 12497060 includes only the two door filters – upper and lower. The base filter is a separate piece, made of foam, and is replaced less frequently. If you are looking for a base filter – search by SKU 9164761 or 12551630.

How do you properly clean the door filters?

The standard cleaning after each cycle is a wipe with a damp cloth – simple and quick. Rinsing under lukewarm tap water is for a deeper clean as needed. If you have rinsed with water – wait for the filters to dry completely before replacing, a damp filter may cause a sensor error.

How often should the filters be replaced?

The filters are cleaned after each drying cycle. Replacement is only required when the plastic breaks, the mesh is torn, or the frame does not fit tightly in the door opening. Genuine filters, properly cleaned, last for many years.

The upper filter is different from the lower one – can they be replaced?

No. The upper and lower filters differ in shape and removal mechanism. The lower filter contains the yellow button and locking mechanism. Make sure each filter returns to its original position.