Description

Siphon for WSP compartment in the detergent drawer for Miele washing machine Miele 7826643

💧 Is the fabric softener left in the drawer? Is the water not draining properly?

Before ordering – make sure it’s a perfect fit! Click the “Check Model Compatibility” button at the top of the page, and the system will confirm that the part is suitable for your washing machine.

🔧 What is a WSP deck and what is its function?

The siphon is a small plastic tube installed inside the detergent drawer, in the WSP compartment (bleach/softener compartment). Its function is to allow controlled drainage of liquid detergents – fabric softener, bleach or liquid starch – into the machine drum at the correct time during the wash cycle.

How does it work? When the machine reaches the final rinse stage, water enters through the jets in the drawer ceiling and fills the chamber. When the water level rises above the siphon, the liquid (softener/bleach) is flushed through the siphon into the drum and mixed with the laundry.

⚠️ When should the deck be replaced?

Signs of a damaged or clogged siphon:

• ✅ Fabric softener remains in the compartment at the end of the program
• ✅ Water is standing in the drawer and not draining
• ✅ Leak from the detergent drawer
• ✅ Unpleasant odor from the drawer (mold/bacteria)
• ✅ The deck is broken, cracked or warped

⚡ Before replacing – try cleaning! In many cases, the problem is caused by a blockage and not a damaged siphon. Fabric softener, starch, and limescale residues can block the siphon. Try cleaning first:

1. Remove the detergent drawer from the machine.
2. Pull the deck out of the cabin.
3. Rinse well with warm water.
4. Also clean the siphon tube and the softener channel.
5. Put the deck back in place and press until it locks.

If cleaning doesn't help, it's time to replace it.

✨ Why an original Miele siphon?

• ✅ Exact fit – Dimensions and configuration identical to the original
• ✅ Quality material – Plastic resistant to cleaning agents
• ✅ Safe locking – Clip mechanism that prevents release
• ✅ Manufacturer's warranty – Original Miele part

🛠️ Simple self-installation

Difficulty: Very easy
Estimated time: 2-5 minutes
Required tools: NO

Replacement steps:

1. Pull the detergent drawer out until it stops.
2. Press the release tab and pull the drawer completely out of the machine.
3. Locate the siphon in the WSP compartment (bleach/softener compartment)
4. Pull the old deck up and out.
5. Insert the new deck and press until it locks into place.
6. Put the drawer back in the machine.

📋 Technical specifications

✅ Compatibility

Compatible washing machine series:

• W1 Series (Models WW, WC, WX)
• W1xxx
• W4xxx
• W6xxx

Common models: WWD, WWF, WWG, WWH, WWI, WCI, WCD, WXD, WXF, WXH, WXI, WXR and more

💡 Tip: If you are not sure if the deck is suitable for your model, use the compatibility check button or contact the service center.

📍 How to find the model number?

The washing machine's identification sticker is located on the inside wall of the door frame - the side that is visible when you open the machine door.

💡 Preventive maintenance tip

To prevent clogging and extend the life of the siphon:

• Clean the drawer and the deck Once every month or two
• Leave the drawer open. A little at the end of the wash – this allows drying and prevents mold
• Avoid overusing liquid starch. – It causes rapid clogging
• Run a cleaning program (Clean Machine) at high temperature once every few weeks

❓ Frequently Asked Questions

Why does fabric softener remain in the compartment at the end of the program? The most common reason is a clogged siphon. Fabric softener residue, starch or limescale are blocking the drain. Try cleaning the siphon with hot water. If the problem persists, the siphon may be damaged and needs to be replaced. Another reason could be clogged jets in the drawer ceiling – clean them with an old toothbrush or toothpick.

There is water in the drawer – is this normal? A small amount of water remaining in the softener compartment at the end of the program is perfectly normal . If there is a significant buildup of water that is not draining, there is probably a problem with the siphon or drain.

How often should you clean the siphon? It is recommended to clean the detergent drawer including the siphon once every month or two , or more often if you use a lot of liquid starch. Washing at low temperatures with liquid detergents increases the risk of bacteria and mold buildup.

Can I use a non-original siphon? Not recommended. A non-original siphon may not fit precisely, not lock properly and cause leaks or drainage problems. The price of the original part is very low compared to the problems that a non-original part may cause.