Description

Original bottom heating element for Sauter oven 8071432

Original bottom heating element for Sauter baking oven, manufacturer's part number 8071432. The part is intended for replacing the bottom heating element in Sauter ovens when the oven stops heating from below or heats unevenly. Certified original part - guaranteed exact fit to the electrical connections, oven chamber dimensions and original heating performance, without the need for space adjustments.

The oven is not heating from the bottom? It is probably the bottom heating element. Replacing with an original Sauter part is the right solution – and just as importantly, the safe solution. Enter your model in the search field or call to check compatibility before ordering.

What is the difference between an original heating element and an unapproved replacement?

Original Sauter 8071432 heating element undergoes manufacturer quality control and comes with coating and conductive copper exactly according to specifications. In the experience of our technicians, non-original parts often have connections that do not exactly match - which can cause sparks, damage to the control board, and in extreme cases, even a safety risk. Original part = peace of mind.

📋 Technical specifications

✅ Compatibility – How do you check before ordering?

Heating element 8071432 is suitable for a variety of Sauter oven models. Before ordering, it is mandatory to verify compatibility according to the model number of your oven - otherwise there is a risk of incompatibility in connections or dimensions.

How do you find the model number? The model number is on the manufacturer's sticker – usually on the inside of the oven door, on the inside frame, or on the back. Look for a sticker with the fields “Model” or “Type” and write down the full code.

🔧 How do you replace a bottom heating element in a Sauter oven?

Replacing a bottom heating element is a medium-high level of complexity work that involves electrical disconnection and reconnection of conductors. It is recommended that it be performed by a certified technician only. Actual replacement time: approximately 30 to 60 minutes.

The replacement steps in brief:

1. Disconnect the oven from the power completely – from the plug or the dedicated circuit breaker.
2. Open the oven door and remove the wire racks.
3. Screws holding the lower heating element to the oven floor – loosen
4. Gently pull the heating element forward and disconnect the electrical connections.
5. Connect the new heating element 8071432 to the exact same connections
6. Secure with screws, replace shelves, and plug in for testing.

💡 Tip from the experts

Before replacing – check the dedicated fuse. From the experience of our technicians, in about 20% of cases where the oven does not heat from below, the problem is in the dedicated fuse for the heating element – ​​and not in the body itself. A simple test with a voltage meter saves the cost of the part and the time of replacement. If the fuse is in order and there is no continuity in the old heating element – ​​the body is the problem, and 8071432 is the correct original replacement.

❓ Frequently Asked Questions

What are the signs that the bottom heating element in my Sauter oven is damaged?

The bottom heating element is defective when the oven does not reach temperature at the bottom, the baking comes out pale from the bottom, or physical damage is visible on the heating element – ​​black spots or a fracture. You can check with a multimeter: lack of electrical continuity confirms a malfunction. If in doubt – send us a picture for diagnosis.

Can I replace the bottom heating element myself, or is a technician required?

Technically, anyone experienced in home electrical work can perform the replacement themselves. However, it is strongly recommended to contact a qualified technician – the bottom heating element operates at 230V, and incorrect connection may damage the oven's control board. An experienced technician completes the job in 30 minutes and performs a full functional test.

Is the 8071432 bottom heating element suitable for all Sauter models?

No – 8071432 is a specific part number that fits certain Sauter models only. Before ordering, it is mandatory to verify compatibility according to the model number of your oven. The model number appears on the manufacturer’s sticker – usually on the inside of the oven door. Contact us for a free compatibility check.