Description

Original temperature sensor for Sauter oven Sauter 8058039

The original sauter 8058039 temperature sensor is the component responsible for measuring the precise temperature in the oven and controlling the heating system. The part is suitable for sauter ovens and serves as a solution to problems with uneven baking, an oven that does not reach the desired temperature, or an oven that overheats. This is an original part that ensures accuracy, durability and full compatibility with the device.

What happens when the temperature sensor breaks down?

An oven that doesn’t heat as well as it used to is probably not a problem with the heating element. In most cases we encounter, the culprit is the temperature sensor – a small component that causes major malfunctions. When the sensor breaks down, the oven “doesn’t know” what the temperature is inside: it can heat too little, too much, or display a completely incorrect temperature reading.

Common signs of a faulty sensor:

• ✅ The food is not ready at the right time, despite correct setting
• ✅ The food is burnt on the outside and soft on the inside
• ✅ The displayed temperature does not correspond to the actual temperature
• ✅ Heat-related error codes (depending on model)

From the experience of our technicians, about 60% of the cases where customers think the heating element is defective – the problem is with the sensor. This is a much simpler and more affordable repair.

Just before ordering – safety above all! A non-original sensor may report incorrect temperatures and cause safety risks and damage to the device. Click the 'Check Model Compatibility' button at the top of the page – the system will immediately confirm that the part is suitable for your model.

Why is an original sensor not an option – it is a must?

A genuine sauter sensor is accurate to the calibration that the oven operates on. The part has been precisely calibrated according to the heating element and the device's control card - each component knows how to "talk" to the rest. A non-genuine part may report a temperature 10-30 degrees off, which affects every baking and may have an extreme risk of causing overheating.

From the experience of our technicians: Customers who installed a non-genuine sensor and then switched to a genuine Sauter sensor reported an immediate and significant improvement in baking results. The difference is noticeable from the first bake.

📋 Technical specifications

✅ Compatible models

The part is suitable for the following models. Ensure exact compatibility according to the model number on the E-Nr sticker of your oven.

Where is the model sticker on the oven? Open the oven door – the sticker is on the metal frame on the inside of the door, usually on the left side.

Built-in & Freestanding Ovens — CU, SA series: CU60, CU80, CU90, CU100, SA715, SA725, SA825, SA835, SA845, SA855, SA925, SA1025, SA1035, SA1045

Built-in & Freestanding Ovens (Free Standing) — SH, SM, SO Series: S600, S700, S800, S900, SH60, SH90, SM60, SM90, SO60, SO90

Pyrolytic Ovens — SAP Series: SAP725, SAP845, SAP1035, SAP1055

🔧 How do you replace a temperature sensor in an oven?

⚠️ Important: Replacing a temperature sensor in a sauter oven requires professional technical knowledge and working with electrical wiring. It is recommended to call a certified technician from the official service. Unprofessional installation may cause additional damage to the device.

If you are an experienced technician, the main steps include: disconnecting from the power supply, dismantling the inner back wall of the baking chamber, disconnecting the old sensor and locating the connection points, connecting the new sensor and initial calibration.

💡 Tip from the experts

From the experience of our technicians – the most common mistake we see is misdiagnosis. Before replacing the sensor, it is worth making sure that the problem is not in the control board. Simple test: If the temperature “jumps” during baking and returns to the range, there is a high chance that the sensor is the culprit. If the temperature does not reach the target point at all – check the heating element first. Proper testing saves money and unnecessary wear.

❓ Frequently Asked Questions

What is a sure sign that the temperature sensor is faulty?

The surest sign is an oven that heats inconsistently – sometimes too hot, sometimes a little too hot. When the sensor is faulty, it reports incorrect values ​​to the control board, which causes uncontrolled heating. An external temperature measuring device (oven thermometer) will confirm the diagnosis within minutes.

Can I use an oven with a faulty sensor?

Not recommended. An oven with a faulty sensor may overheat and endanger the food and the appliance. In addition, prolonged operation in this condition may place a strain on additional components. The correct solution is to stop using it and call a technician.

What is the difference between SKU 8058039 and 8074825?

Part number 8074825 is the updated version that replaces 8058039. Both parts perform the same function, but the manufacturer has updated the order number. If part number 8058039 is not available in stock, 8074825 is the approved direct replacement.