Description

Original bottom heating element for Sauter oven Sauter 8031255

The original sauter 8031255 bottom heating element is the part that heats from the bottom of the oven - responsible for heating the base, uniform baking and the “bottom heat” function in ACE series ovens. The part operates at a power of 1100W at 230V, and is manufactured in the exact dimensions for models ACE1103B and ACE113B. An original part that ensures a perfect fit and safe operation. SKU 8031255.

The oven is not heating from the bottom? The cake comes out pale from the bottom but burnt on top? In the experience of our technicians, uneven baking or no bottom heating at all in most cases indicates a burnt bottom heating element – ​​not a problem with the control panel. The heating element 8031255 is the correct part for repair. To ensure a successful repair and maintain the life of the appliance, it is mandatory to use only original parts. Non-original parts may cause damage and jeopardize the safety of the appliance. Now click on the 'Check model compatibility' button at the top of the page and our system will immediately confirm that the part is suitable for you.

What are the signs that the bottom heating element is burnt out?

A burnt bottom heating element leads to one of three common signs: the bottom of the food remains pale and uncooked , the oven only heats from the top (one-sided heat), or the oven does not reach the desired temperature at all. In our experience, a layer of grease and burnt food that has accumulated on the bottom heating element over the years is the most common cause of premature failure – the dirt heats the tubes unevenly until they burn out.

✅ Quick check before ordering a part: Turn on the oven in the “bottom heat” mode only and check after 3-4 minutes if the oven floor heats up. If the oven floor remains cold – this is a direct sign of a malfunction in the bottom heating element.

⚠️ Important: The bottom heating element is located under the oven chamber floor and is not directly accessible. Accessing it requires dismantling the interior floor - it is essential to use the original part to maintain accurate height and dimensions.

📋 Technical specifications

✅ Compatible models

The part fits the following models (check compatibility by the model number on the identification sticker - located on the front door frame of the oven):

ACE1103B, ACE113B

🔧 How do you replace a bottom heating element in a sauter oven?

Replacing the bottom heating element requires dismantling the oven floor to access the part. This is not a do-it-yourself repair. Electrical knowledge, appropriate tools, and approximately one hour of work time are required.

⚠️ Important: Replacing the bottom heating element requires professional technical knowledge. It is recommended to call a qualified technician from the official service. Unprofessional installation may cause further damage to the oven.

Work steps for the technician:

1. Disconnecting from electricity – Completely disconnect before any work, wait 10 minutes for cooling.
2. Removing the oven floor – Loosening screws and removing the bottom panel
3. Disconnecting the connection wires – Mark before disconnection
4. Loosening the screws holding the heating element – Usually two to three screws
5. Removing the old heating element – Carefully, without bending the pipes
6. Inserting the original part 8031255 – Making sure the part is seated precisely
7. Reconnecting and assembling the floor – Check electrical connections before closing
8. Function test – Activating the “bottom heat” mode and making sure the floor is heating up

💡 Tip from the experts

In our technicians’ experience, cleaning the oven floor after each use of grease significantly extends the life of the bottom heating element. Repeated layers of grease that burn create “hot spots” on the tubes – and these are the points where the heating element breaks. 10 seconds with a paper towel after it has completely cooled can save an expensive repair.

Insight that only those who repair built-in & freestanding ovens know: After replacing the bottom heating element, run the oven empty on high heat (250 degrees) for 20 minutes before the first cooking. This action “burns off” residual manufacturing oil and prevents odor during the first cooking – a step that most guides skip and customers complain about after the replacement.

❓ Frequently Asked Questions

Does a burnt out bottom heating element cause the oven to stop working completely?

Not necessarily. Many built in & Freestanding Ovens continue to operate even with a burnt out bottom heating element – ​​only the functions that use bottom heating stop working. This can be identified by the fact that the “bottom heat” mode does not heat, but the “turbo” mode still works. This is confirmation that the problem is specific to the bottom heating element.

Is the 1100W bottom heating element suitable for all ACE series sauter ovens?

No – it is important to verify exact fit by model number. The 8031255 heating element is approved for models ACE1103B and ACE113B only. Other models in the ACE series may require a different wattage heating element. Always verify by model number on the identification sticker on the oven.

What is the difference between a bottom heating element and a turbo heating element?

Bottom heating element (8031255) is located under the oven floor and heats from below – used for basic baking and bottom heating. Turbo heating element is located at the back of the oven around the fan and emits heat all around. Two independent heating elements – failure of one does not affect the other.

Can the oven be operated for normal baking when the bottom heating element is burned out?

Functions that do not use bottom heating – such as turbo and grill – can be used. Baking with a function that uses a burnt heating element may cause an unbalanced electrical load. It is recommended to replace the burnt element as soon as possible.