Description

Original inner dome for turbo burner on Miele gas stove Miele 08225450

The inner dome 08225450 is a genuine Miele OEM part for the turbo burner on gas hobs. It functions as the central flame distributor of the burner head, allowing for uniform and stable ignition at any power level. The part is suitable for Miele hobs models KM362, KM370 and KM390, and its dimensions are 34 × 4 × 34 mm.

Is the flame not burning evenly? The inner dome is the right place to start.

Turbo burners consist of two separate parts: an outer dome and an inner dome. The inner dome – which is exactly this part – is responsible for spreading the flame in the center of the burner head. When it becomes dirty, distorted, or broken, clear signs appear: a flame that does not spread in a circular shape, difficulty igniting, or spontaneous extinguishing.

Important to know before ordering: The sticker with the model number (E-Nr) of Miele gas hobs is usually located on the oven door frame, or on the back of the appliance. Make sure your model is listed in the compatibility list. Click the 'Check model compatibility' button at the top of the page for instant confirmation.

You can find all original Miele spare parts in our variety of categories.

Original vs. Unapproved Replacement – ​​What's the Difference?

📋 Technical specifications

✅ Compatible models

The part fits the following models (make sure it matches the E-Nr number on the sticker):

KM360 Series: KM362, KM362-1
KM370 Series: KM370, KM370-1
KM390 Series: KM390

🔧 How do you replace the inner dome of the turbo burner?

Replacement is simple and requires no tools. It can be done in just a few minutes.

Replacement steps:

1. Turn off the stove. And make sure the burners are completely cold.
2. Remove the tripod. (The iron mesh) above the turbo burner.
3. Lift the outer dome. – It sits freely on top of the burner.
4. Remove the old inner dome. – It is also not fastened and comes out straight up.
5. Place the new inner dome In place – make sure it sits flat and centered.
6. Put the outer dome back on. And the lattice.

⚠️ Important: Do not light the burner before all parts are properly seated. A dome that is not centered will cause uneven ignition.

If you prefer to have an expert handle this – our service team is available to schedule a home visit.

If there is a tutorial video for this model, we recommend watching it in the video tab below.

💡 Tip from the experts

From Daniel’s field experience: The most common cause of turbo burner failure is not a broken dome – but a dirty dome. Before ordering a new part, remove the inner dome and clean it on the inside with a small brush. In about 40% of cases, the flame returns to being uniform after cleaning alone. If cleaning doesn’t help – then it’s time for a replacement.

❓ Frequently Asked Questions

What is the difference between the inner and outer dome of a turbo burner?

The turbo/wouk burner is made up of 2 separate domes. The inner dome (part number 08225450) spreads the flame in the center of the burner, with a diameter of 34 mm. The outer dome is larger and surrounds the burner on all sides. Each of them can be replaced separately, as needed.

Why doesn't my burner burn evenly after cleaning?

The most common cause is a slight deformation of the inner dome due to excessive heat or a fall. A deformed dome prevents uniform gas flow to all holes in the burner head. Replacement is the correct solution – cleaning will not resolve a physical deformation.

Is this hood suitable for a Miele 5-burner stove?

Part compatibility depends on the specific stove model. Make sure your model is listed in the compatible models list (KM362, KM370, KM390). Other models may require a different part number – check the E-Nr on the appliance.

🚚 Shipping Information | ↩️ Transaction Cancellation and Returns