Description

Original suction hose for Miele vacuum cleaner Miele7736191

The original Miele suction hose, part number 7736191, is a 1.6 m long genuine spare part for the Classic C1 and S2XXX vacuum cleaners. The hose connects the suction handle to the vacuum cleaner unit, allows flexible movement in any room, and ensures full suction transfer without loss of power. Suitable for models that do not use an electric brush.

If you have received a vacuum cleaner that suddenly loses suction – the hose is often the problem. A small hole, a crack in the connection, or damaged flexibility – all of these can reduce the suction power of the motor. The original Miele hose is precisely designed for the Classic C1 and S2 series, made of durable flexible material that allows suction at any angle. Check the compatibility of your model in the table below.

Why is the original Miele hose different from a non-original part?

A genuine Miele part works with the vacuum cleaner's AirClean Sealed System as a single unit. The hose is designed to be perfectly sealed at the connections – both at the point of connection to the handle and at the connection to the vacuum cleaner unit. A non-genuine part may create a small gap at the connections, which immediately reduces suction. From the experience of our technicians: a grip difference of a single millimeter between a genuine part and a replacement part – is enough to drop 15-20% of the suction power.

✅ Made of durable flexible material - hundreds of bends a day without wear ✅ Precise release buttons - disconnects with one push without effort ✅ Fully sealed at both ends of the hose ✅ Original Miele part - fits exactly for the Classic C1 and S2 series

📋 Technical specifications

✅ Compatible models

Classic C1 series:

• Classic C1 Pure Suction
• Classic C1 Turbo Team
• Classic C1 Olympus
• Classic C1 Capri
• Classic C1 Limited Edition
• SBAN0

S2 series (S2XXX):

• S2110, S2111, S2120, S2121, S2130, S2180, S2131

⚠️ Please note: This hose is for vacuum cleaners without an electric brush only. If your vacuum cleaner is connected to an electric brush, the SES116 electric hose must be purchased instead.

🔧 How do you replace the suction hose on the Classic C1?

The replacement is simple and takes about 5 minutes – no tools required. Press the release buttons at the base of the tube on the side of the vacuum unit, pull out. Press the release buttons on the side of the handle and pull – the tube separates. Inserting the new tube: Insert the handle into the connection until it clicks, then connect to the tube until it clicks. Check that the vacuum is sucking – you’re done.

Steps:

1. Turn off the vacuum cleaner and unplug it.
2. Press the release buttons at the end of the hose next to the vacuum unit – pull
3. Press the release buttons on the end next to the handle - pull
4. Insert the new tube into the handle until it clicks.
5. Connect the hose to the vacuum unit until it clicks.
6. Turn on – check for loss of suction.

💡 Tip from the experts

The earliest sign of a damaged hose is not a hole – but a changing sound. If your pump starts making a higher pitched sound than you’re used to, before you actually notice a loss of suction – the cause in 60% of cases is a crack in the suction hose. Our technicians note that many customers try to “fix” a cracked hose with duct tape – it only works for a few days. The original hose is much cheaper than a service visit due to damage caused by irregular pumping over time.

❓ Frequently Asked Questions

Is this hose also suitable for vacuum cleaners with an electric brush?

No – the 7736191 hose is for vacuuming only, without an electrical connection. Classic C1 and S2 vacuum cleaners that come with an electric brush (Electro brush) require an electric vacuum hose SES116, which has electrical wires inside to transmit power to the brush. Check your vacuum model – if a corded brush is included, you need an SES116.

What is the difference between SKU 7736191 and 7736190?

The part number 7736190 is the old version – 7736191 is the updated part number that replaces it. Both are original Miele products for the same model group. Those looking for the old part number 07736190 – it is the exact same product, just with a Miele numbering update. This product also replaces the even older part number: 07156500.

My vacuum cleaner is losing suction – is the hose the problem?

Simple test: Turn off the hose from the vacuum cleaner completely, connect the handle directly to the unit. If the suction returns – the hose is the cause. If the suction is still weak – the problem is elsewhere (full bag, clogged filter, motor). This test saves a technician. In our experience, in about 40% of “weak vacuum cleaner” calls, the cause is a full bag – check first.