The original C00526646 blower wheel rotates the hot air through the dryer drum and directs it outwards. When it cracks or loosens, drying takes longer and the appliance makes noise. The part fits Whirlpool tumble dryers and is a genuine OEM component with an exact fit.

Is your dryer rattling or leaving your laundry damp? The culprit is usually a cracked blower wheel. This is one of the most common and affordable dryer repairs—and it’s easier than you might think.

A moment before ordering – safety above all! To ensure a successful repair and maintain the longevity of the device, it is mandatory to use only original parts. Non-original parts may cause damage. Now click the 'Check Model Compatibility' button at the top of the page and our system will immediately confirm that the part is suitable for you.

Why is the dryer noisy or not drying as well as it used to?

In most cases, the blower wheel is to blame for the malfunction. The wheel is mounted on the motor shaft and rotates the hot air in the drum. Over time, the plastic cracks, or the wheel becomes loose on the shaft. As a result, the air flow weakens, and the device begins to show obvious signs.

The most common signs are three. First, laundry that comes out still damp despite a full cycle. Second, a rattling or knocking noise during operation. Third, an appliance that overheats and sometimes turns off on its own.

Why a genuine part? The genuine wheel is made of heat-resistant plastic designed for fast, continuous rotation. It is precisely balanced, so it does not vibrate or damage the motor shaft. An unapproved replacement may be unbalanced, and therefore cause accelerated wear of the motor itself.

Where can I find the model number? The identification sticker on your dryer is usually located on the inside of the door. Compare the number before ordering to ensure an exact match.

In our technicians' experience, replacing a blower wheel solves over 80% of dryer noise complaints. It is a relatively inexpensive part that saves an expensive technician call.

Looking for SKU C00860600?

The device manufacturer has updated the old part number C00526646 to the current number C00860600. This is an original and completely identical part – simply with an updated catalog number. Both numbers refer to the same blower wheel.

All original Whirlpool replacement parts are available with us in a variety of categories.

Original vs. Unapproved Replacement – ​​What's the Difference?

📋 Technical specifications

✅ Compatible models

The part fits the following Whirlpool models (make sure it matches the number on the appliance sticker):

AWZ series: AWZ 8CD UK.2, AWZ8CDUK2, AWZ8HPPROUK, AWZ9HPPROUK

FTM/FTCM series: FTCM107BUK, FTCM108BUK, FTM1182UK, FTM229X2UK

FFTM / FFTCM series: FFTCM108BUK, FFTM118X2UK, FFTM119X2YUK, FFTM229X2BUK

Additional models: STU93EUK, W6D94WRUK

If in doubt, use the 'Check Model Compatibility' button at the top of the page.

🔧 How do you replace the blower wheel?

The wheel itself is simple to replace – release from the motor shaft and reassemble, without electricity or soldering. However, the wheel is a deep internal part. To get to it, you have to dismantle panels, and sometimes also move internal assemblies. Access is the demanding part, not the replacement.

⚠️ Important: Access to the blower wheel requires internal disassembly of the dryer. It is recommended to call a certified technician from the official service. Improper disassembly may cause additional damage or difficulty in reassembly.

Prefer to have an expert do the work? Our service team is available to arrange professional installation. This way you get a quick and safe repair, without the risk of self-disassembly.

⚠️ Safety: If you still choose to open the device, completely unplug it before any action.

💡 Tip from the experts

💡 Tip from the experts

💡 Tip from Daniel, our service expert: The number one reason for repeated blower wheel breakage is lint and small items (socks) slipping through the filter and into the blower chamber. So, clean the lint filter after every cycle, and check the blower chamber once a month. A 5-minute operation that doubles the life of the new wheel.

❓ Frequently Asked Questions

Why is my dryer noisy when it's running?

A rattling or knocking noise usually indicates a cracked or loose blower wheel. The wheel hits the wall as it rotates, which is why the noise is heard. Sometimes the culprit is lint stuck in the chamber – clean it first, and if the noise persists, replace the wheel.

Can I replace the blower wheel myself?

The replacement itself is simple, but accessing the wheel requires internal disassembly of the dryer. Therefore, it is recommended to call a qualified technician, especially if you are not experienced in disassembling electrical appliances. A technician will perform the job quickly and safely, and prevent damage from improper disassembly.

What is the difference between SKU C00526646 and C00860600?

There is no practical difference – it is the same original blower wheel. The manufacturer has updated the old catalog number C00526646 to the new number C00860600. If you have one of these numbers, this part is for you.

Why does the laundry come out damp despite a full cycle?

A broken blower wheel moves very little air, so the laundry rolls in the drum but remains damp. Before replacing, make sure the lint filter is clean and the outlet pipe is not blocked. If the air flow is still weak, the wheel is likely the cause.

🚚 Shipping Information | ↩️ Transaction Cancellation and Returns