Description

Original Whirlpool Dishwasher Lower Basket Wheel 488000386605

Original wheel for the lower basket of the dishwasher, part number 482000009033, suitable for Whirlpool dishwashers. The wheel allows the basket to slide smoothly on the track and reduces wear. Diameter approximately 35 mm, provides approximately 8 wheels for one basket. Original manufacturer-approved part - not an unapproved replacement.

Is your basket stuck? It's time for a new wheel. When a wheel breaks, the basket resists, bends on the track – and sometimes doesn't move at all. Replacing it takes less than 5 minutes, no tools required, and gets your dishwasher back to working properly. Check that your model number is on the compatible models list before ordering.

Why doesn't the basket go in and out easily?

The wheels are the only point of contact between the basket and the track. Over time, the heat of washing cycles, moisture, and cleaning agents wear down the plastic. The first sign of wear is difficulty moving – the basket “gets” halfway, bends to the side, or makes a scraping noise. In the experience of our technicians, in 80% of these cases it is a broken wheel and not a problem with the track itself. When a wheel is replaced in a timely manner, damage to the track is avoided – a much more expensive repair.

📋 Technical specifications

✅ Compatible models

The part is suitable for selected models from the following series:

Whirlpool: ADG, ADP, GCXP71102 A+, CLDW 40 FD

⚠️ Important: The list of models is not exhaustive. Check compatibility against the full model number (E-Nr) that appears on the model sticker on the upper lip of the dishwasher door, on the inside. If your model is not listed – contact us before ordering.

🔧 How do you replace a wheel for the lower basket?

Difficulty level: Very easy | Time: 5-10 minutes | Tools: None

1. Pull the lower basket out all the way.
2. Locate the broken wheel – it is usually obvious that it is broken, missing, or can be shown to not be turning.
3. Press both side tabs of the wheel at the same time and pull it out.
4. Insert the new wheel – press it into the bracket until you hear a clear click.
5. Put the basket back in and check that the movement is smooth.

Tip: A proper replacement ends with a click – if you didn't hear it, the wheel didn't lock properly.

💡 Tip from the experts

From the experience of our technicians – replace all the wheels together. The average dishwasher has 8 wheels in the lower basket. When one wheel breaks, the rest are already close to failure – they are the same age. Replacing just one wheel will require reopening the dishwasher within a few weeks. Therefore, it is recommended to order 8 units at once and replace them all in one sitting. This is the most common mistake we see – customers who return two or three times to the same problem because they replaced a wheel each time.

❓ Frequently Asked Questions

Can a broken wheel cause further damage to the dishwasher?

Yes. A broken wheel causes the basket to travel unevenly and scrape the track. Over time, the track itself wears out and requires replacement – ​​a much more expensive repair than a single wheel. Prompt treatment prevents progressive damage to the track and the dishwasher structure.

How do you know how many wheels need to be replaced?

The lower basket usually has 8 wheels – 4 in the front and 4 in the back. Check them all with the basket out: a good wheel spins freely and is not broken. When one wheel breaks at an advanced age, it is recommended to replace them all.

Can this wheel be replaced without disassembling the dishwasher?

Absolutely. The replacement is done on the basket only – pull out the basket, replace the wheel, and put it back in. There is no need to disassemble anything from the dishwasher itself and no need for a technician.