Description
Whirlpool Freezer/Cooler Inner Door Hinge Pin 481010632442
The original pin 481010632442 secures the inner door of the small freezer compartment in Whirlpool refrigerators, allowing it to open and close properly. The part fits models in the WBE, WBC and ARC series, and is an original OEM part with the same dimensions and material as the original.
A small inner door inside the freezer compartment that wobbles, doesn't close tightly, or has fallen off completely? Most often, it's not related to the cooling mechanism itself, but to a small plastic pin that has broken over time. A moment before ordering – safety above all! To ensure a precise fit and maintain the integrity of the inner door, it is mandatory to use only an original part. Now click on the 'Check Model Compatibility' button at the top of the page and our system will immediately confirm that the part is suitable for you.
Why is the inner door of the freezer compartment in the refrigerator swinging or falling?
In most cases, the cause is the hinge pin that holds the interior door in place, which has broken or worn out. This pin works under mechanical stress every time the door is opened and closed, and is therefore considered a part that wears out over the years.
When the pin breaks, the inner door loses its grip. It remains loose, partially open, or falls off completely. This compromises the insulation of the small compartment and allows cold to escape inside.
The refrigerator model number (E-Nr) sticker is usually located on the inside wall of the refrigerator or on the back of the appliance. This number is important for verifying exact compatibility before ordering.
A genuine Whirlpool part ensures a precise fit into the spindle grooves. Non-genuine replacements do not always fit snugly.
Original vs. Unapproved Replacement – What's the Difference?
| parameter | Original part (OEM) | Unapproved replacement |
|---|---|---|
| Adaptation to the axis structure | Accurate to the model | Not guaranteed |
| Interior door stability | Locks tightly in place | May wobble even after replacement |
| Durability over time | Full service life | Accelerated wear and repeated breakage |
📋 Technical specifications
| attribute | value |
|---|---|
| Manufacturer's SKU | 481010632442 |
| Cross-Reference | C00325755 |
| brand | Whirlpool |
| GTIN / EAN | 8015250437386 |
| compatibility | Whirlpool combi refrigerators, WBE, WBC, ARC series |
| התקנה | Simple DIY – no special tools required |
✅ Compatible models
The part fits the following models (make sure it matches the model number on the sticker):
WBE series: WBE3375, WBE33752NFCTS, WBE3414
WBC Series: WBC36992NFCAW
ARC Series: ARC4020W, ARC4178
The list is partial. If your model is not listed, click the Check Compatibility button at the top of the page for a quick verification by the full model number.
🔧 How do you replace the hinge pin on the inner door of the freezer compartment?
The replacement is a simple, basic DIY operation, and does not require disconnecting the refrigerator from the power supply – this is a purely mechanical part, not an electrical one.
General replacement steps:
- Open the inner door of the small freezer compartment and locate the remains of the broken pin in the hinge slot.
- Gently pull the remains of the old pin out of the slot, using tweezers or a small screwdriver if necessary.
- Place the new pin into the slot in the hinge and press it in until it locks into place.
- Check that the inner door opens and closes smoothly before returning products to the compartment.
Risk reduction: The replacement does not require breaking, soldering, or disassembling additional parts in the refrigerator – just pulling out and inserting the pin into the slot in the hinge.
Prefer an expert to install? Our service team is available to coordinate a professional installation.
💡 Tip from the experts
Expert Tip: In Daniel's experience in the field, the most common cause of a broken pin is pulling the inner door hard when it is frozen or slightly stuck in ice. Opening it gently and using the slots gently will significantly extend the life of the pin.
❓ Frequently Asked Questions
Can I replace the pin myself without a technician?
Yes, replacing the pin is a simple task that anyone can do at home. There is no need for special tools or unplugging the refrigerator, just pull out the broken pin and insert the new one into the slot in the hinge.
Does the pin fit even if the inner door itself is not broken but just loose?
Yes, a loose interior door that doesn't fall completely is exactly the early sign that the pin is wearing out. It is recommended to replace the pin early, before it breaks completely and the door falls.
How long does the replacement take?
The replacement usually takes just a few minutes, with no tools required. Simply pull out the remains of the old pin and snap the new one into the slot until it locks.
🚚 Shipping Information | ↩️ Transaction Cancellation and Returns







