Description
Original Whirlpool Dishwasher Filter 488000386525
The genuine 488000386525 (also known as C00386682) drain filter is located at the bottom of the dishwasher compartment, below the lower spray arm. It traps food debris and solids and prevents them from entering the drain pump. The part is suitable for Whirlpool dishwashers, and is a genuine OEM part with an exact fit for the relevant models.
Dishes that come out with residue after a full cycle? An unpleasant smell from the dishwasher? The most common cause is a clogged filter that needs replacing. Click the 'Check Model Compatibility' button at the top of the page so our system can instantly confirm that the part fits your model – just before you order. Non-genuine parts may cause damage to the pump and void the manufacturer's warranty.
When does the dishwasher drain filter need replacing?
A clogged filter is the number one cause of poor performance. When the filter mesh becomes clogged, dirty water recirculates through the dishwasher—leaving residue on your dishes. Common signs include rough dishes after a wash, standing water in the bottom of the chamber, a bad odor from the dishwasher, and an F03 (drain failure) error code. Monthly cleaning extends the life of the filter, but after years of use, the mesh can tear or become permanently clogged—requiring a complete replacement.
Looking for SKU C00386682?
The appliance manufacturer uses two catalog numbers for the same part: C00386682 is the European part number, and 488000386682 is the full Sino-European part number. This is an original and completely identical part. The part number 488000386525 that appears on this page belongs to the same compatible Whirlpool part family.
Genuine Whirlpool replacement parts are available in a variety of categories on our website.
Original vs. Unapproved Replacement – What's the Difference?
| parameter | Original part (OEM) | Unapproved replacement |
|---|---|---|
| Model fit | Accurate – a stamp is entered | Not guaranteed |
| Mesh material | Heat and pressure resistant | Not verified |
| Pump safety | Effective filter | May give way to leftovers |
| resistance | Full product life | Accelerated wear |
📋 Technical specifications
| attribute | value |
|---|---|
| Manufacturer's SKU | 488000386525 |
| European SKU | C00386682 |
| brand | Whirlpool |
| Brand + MPN | Whirlpool 488000386525 |
| Part type | Drain filter (microfilter) |
| Location on device | Bottom of the dishwasher compartment, below the lower spray arm |
| compatibility | Whirlpool models – see list of compatible models |
| התקנה | DIY – no tools required |
✅ Compatible models
The part fits the following Whirlpool models (check for exact fit based on the model number on the appliance sticker):
WFC series: WFC3B19UK, WFC3B19UKN, WFC3C24PUK, WFC3C24PXUK, WFC3C26FUK, WFC3C26FXUK, WFC3C26UK, WFC3C33PFUK, WFC3C33PFXUK
WFE / WFO series: WFE2B19UK, WFE2B19UKN, WFE2B19XUK, WFE2B19XUKN, WFO3O32PUK, WFO3P33DLUK, WFO3P33DLXUK, WFO3T3236PUK, WFO3T3236PXU
WIC / WIO series: WIC3B19UK, WIC3C23PEFUK, WIC3C26NUK, WIC3C26UK, WIC3C33PFEUK, WIE2B19NUK, WIO3O33DELUK, WIO3O43DLSUK
WSFE/WSIO series: WSFE2B19UK, WSFE2B19XUKN, WSFO3T223PCX, WSIC3M27CUK, WSIC3M27CUKN
LAM: LAM8375, LAM8675
⚠️ Note: This is a partial list. For full verification, use the compatibility check button at the top of the page.
🔧 How do you replace the drain filter?
Replacing the filter is an easy DIY task that requires no tools. The replacement does not require dismantling any internal parts, just reaching the bottom of the dishwasher compartment.
⚠️ Before you start: Turn off the dishwasher and unplug it. Pump out any standing water at the bottom of the compartment.
- Open the door completely. And take out the lower basket.
- Locate the filter At the bottom of the cell – a gray circle with a grid.
- Turn the filter counterclockwise. and pull it upwards to remove.
- Insert the new filter. into place and turn clockwise until it locks.
- Return the basket., check that the filter is seated properly – and run a short cycle to check.
Performance from day one: The connection is a simple press + screw – no soldering or tools required. Replacement takes about 5 minutes. Prefer an expert to install? Our service team is available to coordinate a professional installation – contact us.
💡 Tip from the experts
In the experience of Daniel from our service team, most customers who complain about dirty dishes have forgotten to clean the filter once a month. A filter that works for months without cleaning becomes a solid disk of food and grease residue – forcing the drain pump to work even harder. Such accumulation causes premature pump failure. 5 minutes of monthly cleaning saves hundreds of shekels in repairs.
❓ Frequently Asked Questions
Why does the dishwasher display code F03 and how do I fix it?
Code F03 indicates a drain failure. The most common cause is a clogged filter. Turn off the dishwasher, remove the filter from the bottom, clean it under running water with a soft brush. If the mesh is torn or damaged – replace the filter with the original one. After cleaning, run a short cycle to test.
How often should the filter be cleaned?
Whirlpool recommends cleaning the filter once a month for normal use. If the dishwasher is used daily with very dirty dishes, it is recommended to clean it twice a month. A clean filter ensures effective washing and prevents unpleasant odors.
Does every filter fit all Whirlpool models?
No. Whirlpool makes several different sized filters for different series. It is important to verify compatibility by the full model number on the sticker – usually found on the inside lip of the dishwasher door. Use the compatibility checker at the top of the page for a quick check.
🚚 Shipping Information | ↩️ Transaction Cancellation and Returns







