Description
Original heating element for Whirlpool C00444744 dryer
The original Whirlpool C00444744 heating element is the part responsible for generating heat inside the dryer drum. Power: 2,000W. Suitable for Whirlpool dryer models DDLX, DELX, DSCX series and more. Professional replacement by a certified technician ensures perfect fit and proper and safe functioning for years.
Why is the dryer not drying? A faulty heating element is the most common reason
Clothes come out damp after a full cycle, the drum spins but there is no heat – these are clear signs of a failed heating element. The heating element is the “heart” of the dryer: it heats the air drawn into the drum and enables efficient drying. Without it functioning properly, the dryer becomes just a spinning drum.
From the experience of our technicians, approximately 65% of the problems in which the dryer "works but does not dry" are caused by a failure in the heating element - usually due to natural wear and tear after years of intensive use, or due to blocked airflow due to a clogged filter.
Important: Before ordering the part, also check the thermal fuse – in many cases it burns out due to heating failure and must be replaced along with the heating element.
⚠️ Safety above all! Using a non-original heating element may lead to overheating, short circuit and significant damage to the appliance. The original Whirlpool part meets all European safety standards.
Just before ordering – it is mandatory to verify! Click the 'Check Model Compatibility' button at the top of the page – the system will immediately confirm that the part is suitable for your dryer model.
📋 Technical specifications
| attribute | value |
|---|---|
| Manufacturer's SKU | C00444744 |
| brand | Whirlpool |
| power | 2,000W |
| Tension | 230V |
| Device type | Clothes Dryer |
| Part type | Heating Element |
| Installation classification | Requires a qualified technician |
✅ Compatible models
The part fits the following Whirlpool models (make sure it matches the E-Nr number on the sticker on the inside of the dryer door):
DDLX series: DDLX80114, DDLX80115, DDLX80116, DDLX90112
DELX series: DELX70112, DELX70113, DELX80113
DGELX series: DGELX80110, DGELX80111
DIGX series: DIGX80110
DLDX series: DLDX70110, DLDX80110, DLDX80111, DLDX80112
DSCR/DSCX series: DSCR80320, DSCX10430, DSCX70110, DSCX70125, DSCX80110, DSCX80111, DSCX80118, DSCX80119, DSCX90130SL
Additional models: TRECOSTAR82BDI, TRKE7750, WCDE80DW
Where is the model number sticker? The E-Nr sticker on Whirlpool dryers is usually located on the inside lip of the dryer door. Open the door and check the inside frame.
🔧 Can I replace the heating element myself?
A heating element is a complex replacement part located deep inside the appliance and connected directly to the electrical system. Replacement requires partial disassembly of the dryer body, knowledge of the wiring diagram, and safe separation of the electrical connectors.
⚠️ Important: Replacing the heating element requires professional technical knowledge. It is strongly recommended to call a certified technician from the official Whirlpool service. Unprofessional installation may cause further damage to the appliance and even pose a fire hazard.
💡 Tip from the experts
The number one cause of premature heater failure is blocked airflow. In our technicians' experience, clothes dryers with a fleece filter that is not cleaned regularly suffer from repeated overheating – and with it a short in the heater after only 3 to 5 years of use. A dryer that is properly maintained – cleaning the filter after each drying, emptying the contents back from the wall – can last 10-12 years. 5 seconds of filter cleaning saves hundreds of shekels in repairs.
❓ Frequently Asked Questions
Why is the dryer spinning but not heating?
The most common cause is a failed heating element or thermal fuse. When the motor is running and the drum is spinning but there is no heat – this usually indicates an electrical problem in the heating system. A qualified technician will diagnose with a multimeter and determine which part needs to be replaced.
Will a non-original heating element work just as well?
A non-genuine heating element may not meet the exact specifications for power and voltage, lead to uneven heating, and shorten the life of the appliance. A genuine Whirlpool part comes in exactly the same dimensions and power that the dryer was designed for – ensuring perfect performance and safety.
How do you know what model the dryer is?
Open the dryer door and check the inside lip of the door – there is an E-Nr sticker with the full model number. Alternatively, you can check the bottom of the appliance or the back. With the model number you can verify an exact fit before ordering.







