Description

Original oven door hinge with spring for built-in & Freestanding Oven Sauter 8057763

Sauter original oven door hinge, part number 8057763, with a built-in spring designed to support the smooth opening and closing of the oven door and to carry the weight of the door. Suitable for built-in & freestanding ovens built in the Sauter EBO680 and OEO8 series, including models OEO8P10X, OEO8P11X, EBO683SS, EBO685S and EBO685SS. Original replacement part from the manufacturer - fits exactly and does not require adjustments.

Is your oven door falling, opening hard, or not staying open at a stable angle? This is a classic sign of a worn hinge. The original hinge 8057763 brings back the quiet, controlled opening you know – and it already comes with the integrated spring, so there's no need to purchase additional parts.

Why does the oven door behave like this?

The hinge makes dozens of turns a day, under high heat and the full weight of the door. In the experience of our technicians, most door failures originate in the hinge and not in the door itself. When the spring weakens, the door loses its controlled movement and begins to drop sharply, remain open in an unstable position, or close with a squeak. Replacing the original hinge – instead of trying to “fix” it – solves the problem permanently.

✅ Built-in and integrated spring - complete hinge, ready for direct installation ✅ Original Sauter part - 100% accurate dimensions, without compromise ✅ Compatible with EBO680 and OEO8 series - check model before ordering ⚠️ Important: Non-original parts may not fit in size and cause accelerated wear of door accessories

📋 Technical specifications

✅ Compatible models

OEO8P10X, OEO8P11X, EBO683SS, EBO685S, EBO685SS

⚠️ Important: Find the model number (E-Nr) on the identification sticker on the inner frame of the oven door before placing your order.

🔧 How do you replace a sauter oven door hinge?

Difficulty level: Technician recommended – the operation involves complete disassembly of the oven door and requires technical experience.

1. Prepare the device – Disconnect the oven from the power supply before any work.
2. Open the door completely. – Open all the way and find the hinge latches on both sides.
3. Release the hinge clips. – Move them to the “release” position (usually upwards).
4. Lift the door off the rails. – Tilt slightly and pull upwards until it separates from the oven.
5. Remove the old hinges. – Loosen the screws holding the hinge to the door body.
6. Insert the new axle. – Place the 8057763 axle manually, screw it back in.
7. Put the door back. – Put it back in the latches, check that it closes with a light touch.

💡 Tip from the experts

The most common mistake we see: Customers replace only one hinge. In our experience in the field, when one hinge is worn out – the other hinge has been through the same load and is usually in an early stage of wear. We recommend replacing both hinges together – this ensures balanced opening and extends the life of the other door components.

Another tip: After installation, check that the door closes with a light push and does not “fall” forward. If the door falls too quickly, the spring may not have fully engaged and should be removed and reinserted.

❓ Frequently Asked Questions

My oven door drops sharply downwards – is it the hinge?

Yes, in most cases it does. A sudden drop of the door is the most obvious sign of a weak hinge spring. The spring built into the hinge regulates the opening speed. When it weakens, the door loses its braking mechanism and drops sharply. Replacing the original hinge 8057763 solves the problem.

Can I replace the axle myself or do I need a technician?

We recommend contacting a qualified technician. The operation involves complete disassembly of the oven door – a job that requires technical experience and can cause damage if not performed correctly. An experienced technician completes the replacement in about 30 minutes.

Does the hinge come with the spring or do you have to buy a spring separately?

The 8057763 hinge comes as a complete assembly – the spring is already integrated into the hinge. There is no need to purchase any additional components. The hinge is ready for direct installation.