Description

Original right glass bracket for Sauter oven door 8512519

Genuine right glass bracket for Sauter oven door, part number 8512519, fixes and aligns the inner glass panel on the right side of the door. The part absorbs prolonged vibration from repeated opening and closing, maintains proper sealing of the baking chamber and extends the life of the glass itself. Fits oven model EB 13220 E 53163 from the EB13220 series.

Is the glass loose, warped, or repeatedly cracked? The cause is often not the glass – but the bracket that is supposed to hold it. A worn or broken bracket allows the glass to move within the frame, and from there the road to irreversible damage is short. Replace the original bracket and avoid an expensive repair. Check now that your model is compatible.

Why is the right bracket essential for the proper functioning of the oven door?

The right bracket is the main anchor point for the door glass. Without it, the glass rests solely on the frame – without fixation. Every time the door is opened and closed, it exerts a lateral force, and over time the glass begins to loosen and, in extreme cases, fall out.

Beyond safety, a proper bracket is critical to the baking performance itself. A door whose glass is not precisely aligned will not close hermetically. Heat escapes from the baking chamber, the baking temperature drops, and cooking results are compromised. In our service experience, many customers report uneven cooking before discovering that the root problem is a worn bracket – not the door at all.

📋 Technical specifications

✅ Compatible models

• EB 13220 E 53163

For additional built-in & freestanding ovens from the EB13220 series – it is recommended to verify against the full model number before ordering.

How do you know if the right bracket needs replacing?

Four signs to look for: The glass feels loose to the touch, there is a creaking noise when opening the door, the glass appears to be tilted to one side, or you see cracks starting at the corners of the glass. Any of these signs indicate a retainer that is not doing its job.

Our technicians report that in 60% of cases where a customer comes in with cracked glass a second time – a findings sheet reveals that the bracket was not replaced with the glass the first time. The glass breaks again because nothing is holding it properly.

🔧 How do you replace the right glass bracket in the oven?

Difficulty level: Medium | Estimated time: 20-30 minutes | Tools: Phillips screwdriver, work gloves

⚠️ First of all – make sure the oven is turned off and completely cold.

1. Open the oven door fully and hold it steady.
2. Remove the glass fixing screws (usually 2-4 screws along the door frame).
3. Carefully lift the glass panel and place it on a soft surface.
4. This is the right bracket – usually attached with a snap fastener or a single screw.
5. Loosen the old bracket and insert the new one until it clicks into place.
6. Put the glass back into the frame and tighten the screws.
7. Check that the glass is stable and that the door closes effortlessly.

⚠️ If the door has multiple layers of glass – it is recommended to use a certified technician.

💡 Tip from the experts

Every time you replace glass, check the left mount as well. Both mounts experience the same load over the same period. If the right one is worn out, it is likely that the left one is on its way to the same condition. A double replacement in one visit saves another service call in a few months.

In our technicians' experience, an upfront replacement of both mounts together costs about half the cost of a return service visit. A genuine part comes with exact dimensions for the model - without the in-field "adjustments" that characterize replacement parts.

❓ Frequently Asked Questions

Is it possible to replace just the right bracket without replacing the glass?

Yes, absolutely. If the glass itself is in good condition – no cracks, chips or haze – the bracket alone can be replaced. The glass is carefully lifted from the frame, the bracket is replaced, and the glass is put back in place. This action alone usually stops the vibration and returns the glass to precise alignment.

Where is the model sticker on a Sauter oven?

On most Sauter ovens, the model sticker (E-Nr) is located on the inner door frame – visible when the door is fully opened, on the left or right side of the frame. Sometimes it is also located on the back of the appliance. The important number for verifying compatibility is the full E-Nr, not just the series name.

What is the risk of continuing to use an oven with a broken bracket?

The immediate risk is the glass falling – a complete breakage could cause injury. Furthermore, a door that is not properly sealed causes heat to escape, uneven baking and unnecessary strain on the heating system. The longer you wait, the more extensive the damage – sometimes to the point of requiring the entire door to be replaced.