Description

Original 300mm thermocouple safety sensor for Sauter gas stove 8065896

Original thermocouple safety sensor for Sauter oven, part number 8065896, 300 mm long with a dedicated clip. The sensor detects an active flame and allows gas flow - when the flame goes out, it automatically closes the gas valve within seconds and prevents leakage. Suitable for Sauter ECG series ovens, and in particular the ECG502I model.

The flame goes out as soon as you release the button? This is the most common fault with Sauter gas ovens – and 80% of cases are caused by a faulty safety sensor. Replacing the original sensor restores the oven to full operation. Check that part number 8065896 fits your model before purchasing.

Why is this sensor critical to the gas safety of your oven?

The safety sensor is the main protection mechanism of the gas stove. It generates a tiny electrical voltage (20-30 millivolts) as long as the flame burns its tip – this voltage holds the gas valve open. As soon as the flame goes out – whether from wind, flooding, or a malfunction – the sensor cools down within 1-3 seconds, the voltage stops, and the valve closes automatically. Without a functioning sensor, there is no protection against gas leakage after the flame is extinguished.

Exact 300mm length for ECG series models – incorrect length will prevent proper connection to the gas valve.

📋 Technical specifications

✅ Compatible models

• sauter ECG502I

⚠️ Important: Before purchasing, verify the oven model. The model sticker (E-Nr) for sauter ovens is located on the inner door frame or on the back of the appliance.

What are the signs of a faulty sensor?

There are three main signs of a sensor that has reached the end of its life. The most common sign: The flame lights up normally but goes out immediately when you release the ignition button – this is the classic sign of a sensor that is not generating enough voltage. The second sign is a flame that goes out after a few minutes, even when everything seems fine. The third sign: Having to hold the button down for a long time – 10 seconds or more – to keep the flame lit.

From the experience of our technicians, 80% of cases where the flame does not hold are the result of a worn safety sensor. Before calling a technician – check that the sensor is not dirty with grease, because in about 20% of cases, gentle cleaning with iron wool solves the problem without replacement.

🔧 How do you replace the safety sensor in a sauter oven?

Replacement requires a qualified gas technician – this work should not be performed without gas certification. Typical completion time: 30-45 minutes.

What the technician will do:

1. ✅ Disconnect the oven from electricity and gas
2. ✅ Dismantling the burner head and accessing the sensor
3. ✅ Releasing the clip and disconnecting the old sensor
4. ✅ Connecting the new sensor (8065896) to the gas valve
5. ✅ Check function and tightness before reconnecting

💡 Tip from the experts

⚠️ The common mistake we see: Replacing a sensor with a non-original part – such a part is not recognized by the manufacturer and may not fit the exact dimensions of the clip, which will cause a loose connection and rapid failure again.

In our experience at official service laboratories – a typical life expectancy of a safety sensor in daily home use is 5-8 years. The common use of grease removers directly on the burner head significantly accelerates wear – use only a damp cloth to clean the area.

❓ Frequently Asked Questions

Why does the flame in a sauter oven go out when you release the button?

The most common cause is a faulty safety sensor (thermocouple). When the sensor does not generate enough electrical voltage from the heat, the gas valve closes. Less than 20% of cases are related to a clogged nozzle or a problem with the valve itself – so replacing the sensor is usually the first and correct step.

Can the safety sensor be replaced by yourself?

No. Working on a gas system requires a qualified gas technician by law. Attempting to replace the sensor without qualification may cause a dangerous gas leak. Contact a qualified Sauter technician.

What is the difference between an original sensor and a non-original part?

The original sensor 8065896 comes with a clip that is precisely designed for ECG series stoves – the geometry ensures optimal contact with the flame. A non-original part may be short, long, or have a clip that does not lock properly – leading to repeated failure.