Description

Original Sauter Turbo Burner Head 8051407

The original Sauter 8051407 turbo burner head is the direct replacement part for restoring a powerful flame on gas stoves. Fits all Sauter gas stove series and compatible CDA models. The original part ensures a precise fit to the burner body, uniform gas distribution across the entire turbo head, and complete safety – without manual adjustments in the field. Full part number: 8051407.

Has the flame on the turbo burner gone out, spread to the sides, or not come up at all like it used to? In 70% of the cases we encounter, the cause is a cracked, worn, or damaged burner head – not a problem with the gas pipe. Replacing the original burner head is the simplest and safest solution.

Before you order – safety first! To ensure a successful repair and maintain the integrity of your stove, it is essential to use only genuine parts. Non-genuine parts may cause uneven gas distribution and safety hazards. Click the “Check Model Compatibility” button at the top of the page for instant confirmation that the part is compatible with your specific model.

Why does the burner head wear out – and what are the signs to identify the problem?

The turbo burner head is exposed to direct heat, spills, and countless heating-cooling cycles. It usually lasts for years – but when it fails, the signs are clear: a yellow-orange flame instead of a blue one, repeated ignition detonations, an asymmetrical flame, or a burner that doesn’t light at all. In our technicians’ experience, customers who replaced the burner head before the problem got worse saved themselves a much more expensive repair later on.

Why only an original part? Non-original burner heads come with wider manufacturing tolerances. A difference of a few tenths of a millimeter in the gas openings can disrupt the gas-air ratio and produce an unstable flame. The original part 8051407 is manufactured to exact Sauter specifications – the same exact dimensions, the same material, the same performance.

Where is the model sticker on your gas hob? On built-in gas hobs – usually on the inner door frame of the cabinet below, or on the back of the hob. On freestanding hobs – on the side or back. Select the full model number (E-Nr) to verify exact compatibility.

📋 Technical specifications

✅ Compatible models

The part is suitable for gas stoves from the following series (make sure it matches the model number on the product label):

• Sauter (all gas stove series)
• CDA

🔧 How do you replace a turbo burner head on a gas stove?

Replacing a turbo burner head is a moderately difficult DIY job – it can be done at home with basic care. The job takes about 15 minutes. It is essential to turn off the gas stove and make sure all gas knobs are completely closed before starting work.

1. ✅ Turn off the stove.
2. ✅ Remove the iron grid above the turbo burner.
3. ✅ Carefully lift the burner dome (the upper dome) – it sits loosely.
4. ✅ Remove the old burner head – usually without screws, pressure and gentleness are enough.
5. ✅ Place the new burner head 8051407 in the exact spot – make sure it sits straight and level.
6. ✅ Return the dome and iron mesh.
7. ✅ Check the ignition – the flame should come out blue and uniform around the head.

⚠️ Not sure? Stop. If the head is not seated properly, do not operate the stove. Contact a qualified technician.

💡 Tip from the experts

In our technicians’ experience, the most common mistake when replacing a burner head is what happens after the replacement: Customers don’t clean the burner body before installing the new head. Food and grease residue that gets into the gas ports of a new head causes premature failure. Clean the burner body with a small brush and a dry rag before installing – a 3-minute operation that extends the life of the burner head by years.

❓ Frequently Asked Questions

Is the turbo burner head the same part as the burner dome?

No. The burner head is the lower part – the body that distributes the gas. The cap is the upper part that sits above it. Sometimes only one of the two needs to be replaced. Part number 8051407 is the burner head only – make sure you correctly identify which part is defective before ordering.

What is the difference between a SABAF burner and a regular burner head?

SABAF burners are Italian burners used in Sauter stoves. The 8051407 turbo head fits the SABAF burner body already installed in the stove. There is no need to replace the burner body – just the head.

The flame is burning but not blue – is the burner head the cause?

A yellow-orange flame indicates an improper gas-air ratio. Common causes: clogged or damaged burner head, improperly seated dome, or dirty gas vents. First clean the existing head with a fine needle – if the problem persists, a new head is the right solution.