Description

Sauter 8057765 Original Oven Door Hinge

The original Sauter 8057765 oven door hinge is a direct replacement part for Turna 4 series ovens. The part is manufactured to original specifications and ensures smooth opening and closing of the oven door, precise sealing to retain heat, and prevention of premature wear of the door mechanism. Suitable for self-replacement at a medium level of difficulty.

Is your oven door difficult to open, stays open halfway, or won't close all the way? A worn hinge is the most common cause of this problem. A worn hinge is not only inconvenient – ​​it causes heat leakage, increases your electricity bill, and can cause cumulative damage to the oven door and frame.

A moment before ordering – safety above all! To ensure a successful repair and maintain the longevity of the device, it is mandatory to use only original parts. Non-original parts may cause damage. Now click the 'Check Model Compatibility' button at the top of the page and the system will immediately confirm that the part is suitable for you.

When does the oven door hinge need replacing?

A worn oven hinge is manifested by very clear signs: a door that does not close evenly along the entire frame, a feeling of “sinking” when opening, a creaking noise, or noticeable heat penetration around the door even when it is closed. As soon as you identify one of these signs, a quick replacement prevents greater damage.

In our technicians' experience, most oven hinges reach the end of their useful life after 8 to 12 years of daily use – especially when the door is opened suddenly or accidentally leaned on. Non-genuine parts tested in the field show accelerated wear after just one year – due to small dimensional gaps that cause uneven friction.

ℹ️ Where is the model sticker? On Sauter Turna 4 series ovens – the sticker is located on the oven frame, on the inside of the door opening. Open the door completely and check on the left or right side of the frame.

📋 Technical specifications

✅ Compatible models

The part fits the following models (make sure it matches the model number on the sticker):

• Turna4 SC&O

⚠️ Important: The Turna series includes several versions with different axles. Make sure the model number on the sticker contains the SC&O designation before ordering.

🔧 How do you replace a door hinge on a Sauter Turna 4 oven?

Replacing an oven door hinge is a moderately difficult DIY job. The average time is 20 to 40 minutes, and only a Phillips and flathead screwdriver are required. It is important to allow the oven to cool completely before starting.

1. ⚠️ Unplug the oven from the power source. Before any action
2. Open the oven door all the way.
3. Locate the hinge locking latch – the small component located on the hinge body itself.
4. Tilt the locking latch upward Until you feel it locked
5. Close the door gently to about 45 degrees (not completely).
6. Lift the door up and pull it towards you – it will come out of the frame.
7. Place the door on a flat surface with a protective pad.
8. Loosen the screws of the old axle, remove it and install the new axle 8057765
9. Return the door to the frame in reverse order, making sure the locking latches return to the open position.

💡 Tip from the experts

From the experience of our technicians, even after replacing the hinge, it is worth checking the door seal along the entire perimeter. In 40% of cases where the hinge has worn out, the seal also shows signs of wear – and two faults together cause heat leakage that adds about 15% to the oven's electricity consumption. Second test: Fold a sheet of paper and pull it out of the closed door – if it comes out without resistance, the seal requires replacement.

❓ Frequently Asked Questions

Can I replace the Sauter oven door hinge myself?

Yes, replacing a door hinge is a medium level of difficulty and suitable for DIY. The only tools required are a Phillips screwdriver and a flathead screwdriver. The key is to lock the hinge latch before removing the door – an action that prevents the door from falling. The average time for a complete repair is about 30 minutes, including the oven's cooling time.

What are the signs that the axle needs replacement and not another problem?

If the door sags to one side, makes a creaking noise when opening, or doesn’t close evenly along its entire perimeter, it’s usually a worn hinge. On the other hand, if the door closes but heat escapes around it, the problem is usually in the gasket, not the hinge. If in doubt, a qualified technician can diagnose it in minutes.

How long does an original axle last compared to a replacement part?

According to our experience in hundreds of built in & Freestanding Oven repairs, a genuine hinge lasts 8 to 12 years under normal use. Non-genuine parts tested show significant wear after one to three years, due to small dimensional differences that cause uneven friction in the hinge. The price difference between genuine and replacement does not justify the risk.