Description

Genuine Whirlpool W10571967 Freezer Door Seal

Genuine Whirlpool freezer door seal, part number W10571967, Apollo Gray. The seal is mounted on the inner door panel of the freezer and creates an air-tight seal that prevents warm air from entering the refrigerator compartment. Dimensions: 34.5 inches x 23 inches. Fits Whirlpool models in the WRF535 series and more.

The door won't close properly? Ice forming inside the freezer? These are the first signs of a worn-out freezer seal. The original W10571967 seal solves the problem exactly – no surprises, no manual adjustments, straight from the factory.

Check compatibility according to the model number on the specification sticker inside the refrigerator before ordering.

Why doesn't the door close and how is the gasket attached?

A worn or cracked door seal stops maintaining an airtight seal between the freezer door and the refrigerator body. The result: warm air leaks in, the compressor works overtime, and electricity consumption increases. In the experience of our technicians, changing a worn freezer seal reduces the refrigerator's electricity consumption by an average of 10% to 15% - in addition to solving the problem of ice and uneven cooling temperature.

📋 Technical specifications

✅ Compatible models

The W10571967 gasket is suitable for Whirlpool refrigerator models, including:

Whirlpool: WRF535SMBB00, WRF535SMBM00, WRF535SMBW00, WRF535SMHB00, WRF535SMHW00, WRF535SMHZ00 to WRF535SMHZ08, WRF535SWBB00, WRF535SWBM00, WRF535SWBW00, WRF535SWHB00. WRF535SWHB10, WRF535SWHV00, WRF535SWHV02, WRF535SWHV10, WRF535SWHW00, WRF535SWHZ00 to WRF535SWHZ03

Important: This list is partial. To verify full compatibility with your model, check the model number on the specification sticker (usually inside the refrigerator door or on the left side of the refrigerator compartment).

🔧 How do you replace a freezer door seal?

Difficulty level: Easy to moderate – can be done by yourself without special tools. Replacement time: 15 to 30 minutes.

1. Open the freezer door wide.
2. Gently pull the edge of the old gasket – it is held in a groove in the inner door panel.
3. Remove all of the old gasket along the entire perimeter of the door.
4. Clean the groove from dust and rubber residue.
5. Insert the tip of the new gasket into the groove in one corner and work around the perimeter.
6. Make sure all edges fit into the groove evenly.
7. Plug in the refrigerator and close the door – check that it closes with one clean click.

💡 Tip from the experts

If the new gasket came with slight creases from the packaging – let it lie in a warm place for a few hours before installation. The flexibility will return to it immediately. The technician The most common mistake we see: Customers who replace a gasket and find that the problem remains – because they did not check that their model number matches the part number. Always check by the full model number, not just by the series name.

❓ Frequently Asked Questions

How do you know if the gasket needs replacing?

A damaged seal shows clear signs: visible deformation, cracks, places where the rubber is not tight to the door, ice accumulating in the corners of the freezer, or a feeling that the door is not “sucked” in when closed. A simple home test: insert a 100 NIS bill between the door and the refrigerator and close it. If the bill is easily removed, the seal probably needs replacing.

What are the part numbers that the W10571967 gasket replaces?

The W10571967 gasket directly replaces the following parts: W10443320, AP5692034, PS8688875, 3022640, W10164042, W10164042N, W10199892, and 12683820AP. If you have one of these numbers – W10571967 is the correct original gasket.

Can the gasket be installed by yourself?

Yes. Replacing a freezer door seal is one of the easiest refrigerator replacements. No special tools are required – the seal snaps into place. All you need is a new, genuine seal, a few minutes, and the patience to work around the perimeter of the door.