Description

Original burner head cover for Sauter gas stove 70X2031

Original Sauter gas stove burner head cap, part number 70X2031, designed for models TG890XC and STG974BA. The cap is responsible for distributing the flame evenly and precisely over the burner head. Certified original part - full compatibility with the gas head, ignition nozzles and safety mechanism is guaranteed. Suitable for everyday cooking and modern burners made by DEFENDI.

An uneven flame, a burner that throws sparks in all directions, or a dome that has blackened and warped from heat? It's time to replace it. A damaged burner dome disrupts the flow of the air-gas mixture and directly affects cooking efficiency – and sometimes even triggers the safety sensor and turns off the burner itself. Check that your model is on the compatibility list and buy with confidence.

Why does the stovetop cover break?

The burner dome is exposed to direct heat, grease, and liquid splashes more than any other part of the stove. In our experience in technical service, the most common causes of dome damage are aggressive cleaning with abrasive materials, inaccurate placement of the dome after cleaning, and spilling liquids directly on the operating burner. A bent or broken dome causes an uneven blue-yellow flame – a clear sign that it is time for replacement.

📋 Technical specifications

✅ Compatible models

• TG890XC
• TG890XC1
• STG974BA
• STG974BA1

Important: Before ordering, locate the model sticker (E-Nr) of the hob. For Sauter gas hobs – the sticker is usually located on the door frame or on the back of the appliance. Compare the full model number including the suffix (BA / BA1) to the list above.

🔧 How do you replace a burner cap on a Sauter gas stove?

Replacement is simple and requires no tools – it is a typical DIY part that most customers can do on their own in just a few minutes.

1. Turn off the stove. Make sure all burners are completely cold.
2. Remove the elevating grid (tripod) above the relevant burner.
3. Lift the old dome straight up – it sits loosely on top of the burner without screws.
4. Place the new dome on the gas head – make sure it lies flat and centered.
5. Replace the lifter grid and perform a test ignition.

⚠️ After placing the dome – light the burner and check that the flame is blue and uniform throughout the entire circumference of the dome. A yellow-orange flame indicates incorrect seating.

💡 Tip from the experts

Cleaning burner caps is the number one cause of malfunctions we see in the field. Washing in boiling water with soap and air drying is the correct method. In our experience, about 30% of customers who replace a damaged cap find that the problem is solved immediately with the correct installation of the new component – ​​the flame returns to being blue, uniform and stable, just like on the day of purchase.

A genuine Sauter part is guaranteed to be an exact match to the burner nozzles, dome height and correct clearance from the ignition electrode – unlike unapproved replacement parts which may cause uneven ignition or trigger the safety sensor for no reason.

❓ Frequently Asked Questions

Can I continue to use a stove with a damaged burner dome?

Prolonged use with a bent or broken dome is not recommended. A damaged dome causes an uneven flame that affects cooking efficiency and the life of the burner head. In some cases, the safety sensor built into the Sauter stove may interpret the irregular flame as a danger and automatically cut off the gas flow.

Is the burner dome the same for all Sauter models?

No. Burner caps vary between models, between burner types (regular vs. turbo) and between gas head manufacturers (DEFENDI vs. SABAF). The 70X2031 cap specifically fits models TG890XC and STG974BA. Always check the full model number before ordering.

What is the difference between a regular burner head dome and a turbo burner dome?

A turbo burner cap is larger in diameter and designed to spread a high-intensity flame. A regular burner cap, such as the 70X2031, is suitable for medium and small burners intended for regular cooking and not for wok cooking. Do not attempt to interchange caps between different burner types – the fit will not be exact.